* Add documentation for STS3x Temperature sensors
* Updated formatting
* Updated index and other temperature sensors with link to STS3x sensor
* Added STS31 sensor photo
* Updated documentation with flattened config.
* Remove from some pages
Those sensors aren't really similar to this one, so removing them
* Remove references
Same, plus I don't want to fix all the merge conflicts
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add documentation for STS3x Temperature sensors
* Updated formatting
* Updated index and other temperature sensors with link to STS3x sensor
* Added STS31 sensor photo
* Add documentation for SHTCx Temperature sensors
* Fixed reference to a sensor thumbnail
* Cleaned up changes leaked from STS3x feature
* Remove references on other pages
It's already getting too cluttered...
* Remove references
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add documentation for STS3x Temperature sensors
* Updated formatting
* Updated index and other temperature sensors with link to STS3x sensor
* Added STS31 sensor photo
* Updated documentation with flattened config.
* Remove from some pages
Those sensors aren't really similar to this one, so removing them
* Remove references
Same, plus I don't want to fix all the merge conflicts
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add documentation for STS3x Temperature sensors
* Updated formatting
* Updated index and other temperature sensors with link to STS3x sensor
* Added STS31 sensor photo
* Add documentation for SHTCx Temperature sensors
* Fixed reference to a sensor thumbnail
* Cleaned up changes leaked from STS3x feature
* Remove references on other pages
It's already getting too cluttered...
* Remove references
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add index for new Xiaomi ClearGrass E-Ink Sensor
* Add Xiaomi Cleargrass Sensor Documentation
Add all the needed documentation, such as index,
references and main page of this sensor
* Fix images width
Adjust images width to a better fit in the page
* Fix apiref of Xiaomi Sensors
The apiref of Cleargrass and LYWSD02 models point
to the mijia's api, so I fix this
* Fix Xiaomi Cleargrass documentation mistake
Line 43 of xiaomi_cleargrass.rst references to
Xiaomi Mijia's sensor. It should reference to
Xiaomi Cleargrass.
Also I change titles of this sensor in order to
avoid the title uses 2 lines
* Add docs for atm90e32 sensor
* Correct name for CT4
* fix title bar length
* use correct subsubsections chars
* add newlines before figure
* Update components/sensor/atm90e32.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* move required setting to top
* Update atm90e32.rst
Add note about SPI, and fix line_freq
Co-authored-by: Andrew Thompson <andrew@whosonlocation.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* add note for asynchronously update of adc
* Move to section; add details; change ID name to match example config
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add docs for CT Clamp
* Fix title bar
* Fix reference
* 2 many changes
* Update docs for new configuration
* Compress index image
* Update for config changes
- Also remove 3.3V message, because if the user needs to calibrate anyway, then the 3.3V is also part of the calibration process.
- Use calibrate_linear instead of multiply, more user-friendly
- Update SEO image
-
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add mpr121 docs and images
* add images
* update mpr121 docs
* Title bar same length as text
* wrong size and location
* wrong size and location
* wrong location
* wrong size and location
* wrong size and location
* Added binary_sensor_map
* tabs to spaces
* added to index
* add image
* text changes
* remove linefeed
* image is jpg not png
* preview fail??
* Update binary_sensor_map.rst
- Make use case and function more clear
- Remove options that do not exist yet.
- Fix incorrect sensor link in configuration variables
- Fix required values labeled optional
- Less literal text with backslash. Was hard to read.
- Move config example essential part up.
- Remove disqus
* Update binary_sensor_map.rst
* Fix
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Added documentation for AM2320
* Added new files for AM2320
* Fixed too long row
* Update am2320.rst
Co-authored-by: Mikkonen Teemu <teemu.mikkonen@iki.fi>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Clarify that this component uses voltage range at the chip pin, but voltage range at the board pin can be greater (e.g., for NodeMCU)
## Description:
**Related issue (if applicable):** fixes <link to issue>
**Pull request in [esphome](https://github.com/esphome/esphome) with YAML changes (if applicable):** esphome/esphome#<esphome PR number goes here>
**Pull request in [esphome-core](https://github.com/esphome/esphome-core) with C++ framework changes (if applicable):** esphome/esphome-core#<esphome-core PR number goes here>
## Checklist:
- [ ] Branch: `next` is for changes and new documentation that will go public with the next ESPHome release. Fixes, changes and adjustments for the current release should be created against `current`.
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Document SDS011 component
* move sds011 component to right position
* indicate type of parameters
* ✏ Rearrange code a bit and minor edits to make it clearer
* remove query_mode
* Lint
* Update for update_interval changes
* Merge remote receiver component with platform
* Merged remote transmitter component with platform
* Merge pca9685 component with output
* Minor fixes
* Minor fix
* Fixed headers
* reshuffled esp32 touch binary sensor
* Reshuffled pn532 rfid reader
* Fixed images
* Reshuffled rdm6300 RFID component
* Reshuffled my9231 led driver component
* Reshuffled ads1115 component
* Reshuffled SSD1306 display component
* Reshuffled Character-Based LCD Display component
* Reshuffled fastled component
* Fixes netlify
* Remove duplicate figure
* Remove duplicate figure
* Remove duplicate figure
* Reorder SSD1306
To my knowledge, the i2c version is more common, so put it first.
* Put fastled clockless above SPI
clockless is more common, so put it first
* Cleanup index
Tag was used initially to distinguish between the component and binary sensor, no longer needed.
* Remove duplicate figure
