* Add documentation for STS3x Temperature sensors
* Updated formatting
* Updated index and other temperature sensors with link to STS3x sensor
* Added STS31 sensor photo
* Updated documentation with flattened config.
* Remove from some pages
Those sensors aren't really similar to this one, so removing them
* Remove references
Same, plus I don't want to fix all the merge conflicts
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add documentation for STS3x Temperature sensors
* Updated formatting
* Updated index and other temperature sensors with link to STS3x sensor
* Added STS31 sensor photo
* Add documentation for SHTCx Temperature sensors
* Fixed reference to a sensor thumbnail
* Cleaned up changes leaked from STS3x feature
* Remove references on other pages
It's already getting too cluttered...
* Remove references
Co-authored-by: Otto Winter <otto@otto-winter.com>
* update esp32camera documentation - note about PWM
As I was fighting with this yesterday, I think this can be part of esphome documentation.
* Update esp32_camera.rst
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Small changes from proofreading.
* Proofreading changes.
* Correction from travis checks
* Update guides/getting_started_command_line.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* More proofreading changes.
* More proofreading changes.
* Minor corrections
* Updated MCP23017 Component To Cover 8 & 16 Port Chips
* Made requested changes, adding short paragraph at top of MCP230xx.rst
explaining the page is for MCP23008 and MCP23017, also deleted now
obsolete MCP23017.rst
* Added separate sections for MCP23017, MCP23008
* Remove MCP23017 page (merged with new one)
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add index for new Xiaomi ClearGrass E-Ink Sensor
* Add Xiaomi Cleargrass Sensor Documentation
Add all the needed documentation, such as index,
references and main page of this sensor
* Fix images width
Adjust images width to a better fit in the page
* Fix apiref of Xiaomi Sensors
The apiref of Cleargrass and LYWSD02 models point
to the mijia's api, so I fix this
* Fix Xiaomi Cleargrass documentation mistake
Line 43 of xiaomi_cleargrass.rst references to
Xiaomi Mijia's sensor. It should reference to
Xiaomi Cleargrass.
Also I change titles of this sensor in order to
avoid the title uses 2 lines
* Basic auth
* Basic auth
* typo
* Update web_server.rst
* Move auth example out of top-level example
Reason: Most users will copy-paste that into their config directly, which then causes a validation error because of the missing !secret value.
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add description of id Parameter
see here: https://github.com/esphome/issues/issues/625
* add id parameter and explantion to i2c
I hope this explains it better.
* Update components/i2c.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Note sure if i have done the note right
In the preview it doesn't seem to render correctly
* Update i2c.rst
* Update i2c.rst
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add configuration example for TTGO T-Camera v1.7
For `esp32_camera`
I added the configuration for a newly received TTGO T-Camera marked as v1.7
Took me a while to figure out the pinout , so I thought I'd save others the trouble.
* Remove image options
* Update esp32_camera.rst
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add docs for atm90e32 sensor
* Correct name for CT4
* fix title bar length
* use correct subsubsections chars
* add newlines before figure
* Update components/sensor/atm90e32.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* move required setting to top
* Update atm90e32.rst
Add note about SPI, and fix line_freq
Co-authored-by: Andrew Thompson <andrew@whosonlocation.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Template won't just work with the short name
lambdas won't accept IDLE, OPENING, or CLOSING. Need to specify COVER_OPERATION_IDLE, COVER_OPERATION_OPENING, or COVER_OPERATION_CLOSING.
* Update template.rst
* Added documentation for scan_length in Addressable Scan Effect
* Renamed scan_length to scan_width in Addressable Scan Effect, fixed default value in example
* add note for asynchronously update of adc
* Move to section; add details; change ID name to match example config
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add docs for CT Clamp
* Fix title bar
* Fix reference
* 2 many changes
* Update docs for new configuration
* Compress index image
* Update for config changes
- Also remove 3.3V message, because if the user needs to calibrate anyway, then the 3.3V is also part of the calibration process.
- Use calibrate_linear instead of multiply, more user-friendly
- Update SEO image
-
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add mpr121 docs and images
* add images
* update mpr121 docs
* Title bar same length as text
* wrong size and location
* wrong size and location
* wrong location
* wrong size and location
* wrong size and location
* Added binary_sensor_map
* tabs to spaces
* added to index
* add image
* text changes
* remove linefeed
* image is jpg not png
* preview fail??
* Update binary_sensor_map.rst
- Make use case and function more clear
- Remove options that do not exist yet.
- Fix incorrect sensor link in configuration variables
- Fix required values labeled optional
- Less literal text with backslash. Was hard to read.
- Move config example essential part up.
- Remove disqus
* Update binary_sensor_map.rst
* Fix
Co-authored-by: Otto Winter <otto@otto-winter.com>
* added debounce and threshold
* extended and fixed documentation for thresholds
* line to long
* line to long list end
* no spaces at lin end
* Update mpr121.rst
* default for touch release thresholds
* Lint
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Added documentation for AM2320
* Added new files for AM2320
* Fixed too long row
* Update am2320.rst
Co-authored-by: Mikkonen Teemu <teemu.mikkonen@iki.fi>
Co-authored-by: Otto Winter <otto@otto-winter.com>
