* ifan02 cookbook
* removed spaces
* removed spaces
* indent codeblock, newline at end
* fixes
* add seo :image:
* spaces...
* Complete the example code & fix compilation errors
Tried compiling this code today using ESPHome 1.13.6.. it would not compile.
* The ifan02.h file was the main culprit and I was able to fix the issue.
* The .yaml example was missing a few declarations at the beginning so I added them.
* I fixed an error related to using ```light``` for the light id since that is a reserved name.
* I added an ```on_boot``` declaration to turn off the light as early as possible after power is restored. (if mains power is restored in the middle of the night and the light turns on while you are sleeping it can be quite annoying, this turns it off during the boot process).
* removed blank spaces on line 66
Those blank spaces get me every time ;-)
* fix doc links (hopefully)
I think my last PR was made against the wrong fork/branch/etc... sorry, I'm still learning github.
I currently have the time and really want to see this make it into the cookbook. I think if you add me as a collaborator I would be able to push the changes and help get the errors sorted more quickly; if not, no worries, I'll take no offense and do my best to continue helping as we are doing now.
* fix fan link
replace
```
:doc:`/components/fan`
```
with
```
:doc:`/components/fan/index`
```
Co-authored-by: mjoshd <35782597+mjoshd@users.noreply.github.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Cookbook for Sonoff Light Switches
Cookbook for various Sonoff Light Switch options including Basic, Dual and T1-3
* Removed references to myself
All references to I have been removed and re worded into a more generic text
* Fixed Formatting issues to Pass Travis Checks
* Update cookbook/sonoff-basic-light-switch.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update cookbook/sonoff-dual-light-switch.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update cookbook/sonoff-dual-light-switch.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update cookbook/sonoff-dual-light-switch.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update cookbook/sonoff-dual-light-switch.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update cookbook/sonoff-dual-light-switch.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update cookbook/sonoff-dual-light-switch.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update cookbook/sonoff-dual-light-switch.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update cookbook/sonoff-dual-light-switch.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* YAML updates
Removed fast_connect, UART swotches from Dual R1, and reference to an issue that no longer exists
* add sx1509 docs
* add table
* sx1509 docs
* added to index
* fixed table
* text fixes
* Formatting
* Use standardized section header keys
* Spelling
* Properly size index file
* Use short name for index page (table view)
* fixed review issues
* Add API Reference
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add documentation for new Tuya dimmer component
* add more info and change configuration names
* Rename file to match platform name
* Move default gamma_correct/transition_length handling to code
Co-authored-by: Samuel Sieb <samuel@sieb.net>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add documentation for STS3x Temperature sensors
* Updated formatting
* Updated index and other temperature sensors with link to STS3x sensor
* Added STS31 sensor photo
* Updated documentation with flattened config.
* Remove from some pages
Those sensors aren't really similar to this one, so removing them
* Remove references
Same, plus I don't want to fix all the merge conflicts
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add documentation for STS3x Temperature sensors
* Updated formatting
* Updated index and other temperature sensors with link to STS3x sensor
* Added STS31 sensor photo
* Add documentation for SHTCx Temperature sensors
* Fixed reference to a sensor thumbnail
* Cleaned up changes leaked from STS3x feature
* Remove references on other pages
It's already getting too cluttered...
* Remove references
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Updated MCP23017 Component To Cover 8 & 16 Port Chips
* Made requested changes, adding short paragraph at top of MCP230xx.rst
explaining the page is for MCP23008 and MCP23017, also deleted now
obsolete MCP23017.rst
* Added separate sections for MCP23017, MCP23008
* Remove MCP23017 page (merged with new one)
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add index for new Xiaomi ClearGrass E-Ink Sensor
* Add Xiaomi Cleargrass Sensor Documentation
Add all the needed documentation, such as index,
references and main page of this sensor
* Fix images width
Adjust images width to a better fit in the page
* Fix apiref of Xiaomi Sensors
The apiref of Cleargrass and LYWSD02 models point
to the mijia's api, so I fix this
* Fix Xiaomi Cleargrass documentation mistake
Line 43 of xiaomi_cleargrass.rst references to
Xiaomi Mijia's sensor. It should reference to
Xiaomi Cleargrass.
Also I change titles of this sensor in order to
avoid the title uses 2 lines
* Add docs for atm90e32 sensor
* Correct name for CT4
* fix title bar length
* use correct subsubsections chars
* add newlines before figure
* Update components/sensor/atm90e32.rst
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* move required setting to top
* Update atm90e32.rst
Add note about SPI, and fix line_freq
Co-authored-by: Andrew Thompson <andrew@whosonlocation.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add docs for CT Clamp
* Fix title bar
* Fix reference
* 2 many changes
* Update docs for new configuration
* Compress index image
* Update for config changes
- Also remove 3.3V message, because if the user needs to calibrate anyway, then the 3.3V is also part of the calibration process.
- Use calibrate_linear instead of multiply, more user-friendly
- Update SEO image
-
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add docs for CT Clamp
* Fix title bar
* Fix reference
* 2 many changes
* Update docs for new configuration
* Compress index image
* Update for config changes
- Also remove 3.3V message, because if the user needs to calibrate anyway, then the 3.3V is also part of the calibration process.
- Use calibrate_linear instead of multiply, more user-friendly
- Update SEO image
-
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add mpr121 docs and images
* add images
* update mpr121 docs
* Title bar same length as text
* wrong size and location
* wrong size and location
* wrong location
* wrong size and location
* wrong size and location
* Added binary_sensor_map
* tabs to spaces
* added to index
* add image
* text changes
* remove linefeed
* image is jpg not png
* preview fail??
* Update binary_sensor_map.rst
- Make use case and function more clear
- Remove options that do not exist yet.
- Fix incorrect sensor link in configuration variables
- Fix required values labeled optional
- Less literal text with backslash. Was hard to read.
- Move config example essential part up.
- Remove disqus
* Update binary_sensor_map.rst
* Fix
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add mpr121 docs and images
* add images
* update mpr121 docs
* Title bar same length as text
* wrong size and location
* wrong size and location
* wrong location
* wrong size and location
* wrong size and location
* Added binary_sensor_map
* tabs to spaces
* added to index
* add image
* text changes
* remove linefeed
* image is jpg not png
* preview fail??
* Update binary_sensor_map.rst
- Make use case and function more clear
- Remove options that do not exist yet.
- Fix incorrect sensor link in configuration variables
- Fix required values labeled optional
- Less literal text with backslash. Was hard to read.
- Move config example essential part up.
- Remove disqus
* Update binary_sensor_map.rst
* Fix
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Added documentation for AM2320
* Added new files for AM2320
* Fixed too long row
* Update am2320.rst
Co-authored-by: Mikkonen Teemu <teemu.mikkonen@iki.fi>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* add ttp229-lsf docs
* fixed link to datasheet
* remove indent
* type image filename
* convert image to jpg
* Update ttp229.rst
- Change id in example to name. Reason: otherwise it won't show up in frontend and users will be confused
- Reorder conf options
- esphomelib -> esphome
* Remove disqus
