AlexCPU
7b4a42cfc0
correct details in SEN5x documentation ( #2692 )
...
* correct connector details in SEN5x documentation
* remove Sen54 from section on NOx
2023-03-07 09:23:09 +01:00
Kamahat
58831869de
small issue on unit used ( #2693 )
...
small issue on unit used
2023-03-07 09:22:27 +01:00
cinghialino
f1f9be6887
Update anova.rst ( #2696 )
2023-03-07 09:21:47 +01:00
Mathias Stock
a28da87762
wrong name for the link ( #2695 )
2023-03-07 09:20:43 +01:00
Anthony Keane
9eb91e153e
Update custom.rst ( #2699 )
...
Adding ID reference cos I spent 3 hours trying to find why I got this error
Couldn't find ID 'my_custom_switch'. Please check you have defined an ID with that name in your configuration.
2023-03-07 09:20:08 +01:00
Rob Adams
61f79fba3a
Fix typo in filter max docs ( #2701 )
2023-03-07 09:19:07 +01:00
systeembeheerder
cac3e0f606
Update modbus_controller.rst ( #2708 )
...
S_QWORD is signed, not unsigned
2023-03-07 09:17:39 +01:00
Jeff
c56b231679
Update safe_mode.rst ( #2713 )
...
* Update safe_mode.rst
* Update safe_mode.rst
---------
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2023-03-07 09:16:24 +01:00
Sean Carolan
c50477f1d6
Removing default setting ( #2716 )
...
`discovery: true` is on by default and therefore not required here. You only need this to set `discovery: false`
2023-03-07 09:08:38 +01:00
kahrendt
ec78f92910
Add documentation for fs3000 sensor. ( #2715 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-03-07 19:27:20 +13:00
Nathaniel Wesley Filardo
8c3845a312
climate on_control documentation ( #2720 )
2023-03-07 19:27:02 +13:00
Petr Kejval
d1e7907930
Update resistance.rst ( #2725 )
...
* Update resistance.rst
Spent many hours to figure it out why my NTC reading are incorrect. Found out that ADC readings must be multiplied by 3.3 because built-in voltage divider on ADC pin on some boards.
* Update resistance.rst
2023-03-06 20:23:01 +01:00
Carlos Garcia Saura
6a90cd8cfc
Improve example in SCD4X for ambient pressure compensation ( #2645 )
...
* Update scd4x.rst
* Update scd4x.rst
* Update scd4x.rst
* Improve calibration example
2023-03-06 16:24:06 +01:00
Ian Reinhart Geiser
9f22bf66ff
Clarify purpose of appending the mac address ( #2721 )
2023-03-06 16:54:04 +13:00
Tomas Klouda
cc426b972c
Mention MH-Z14 as working with MH-Z19 library. ( #2719 )
2023-03-05 14:49:01 +01:00
Ian Reinhart Geiser
5d25fac978
Clarify what IAQ is ( #2714 )
...
* Clarify what IAQ is
Since standards are only for companies that lack a marketing department, I clarified some of the documentation around Bosch's definition of what IAQ means in their universe. There is a lot here and it was taken from their datasheet directly that I provided a link to anyway. I just wanted to include the important stuff to save people from surprises because like me they didn't bother to follow the links. I can remove the b-VOC stuff if it's too much noise, but I thought it clarified to the users what it might be measuring for. I also changed `2` to `₂` in `CO2` for the non-code snippets soothe the emotional damage incurred from doing too many school papers in LaTeX.
* fix table
2023-03-02 22:32:29 +01:00
Jesse Hills
26f59b8540
Remove copy paste config var mistake on mics-4514 ( #2711 )
2023-02-28 09:02:42 +13:00
Jesse Hills
7f5385981a
Fix adc link ( #2710 )
2023-02-28 08:17:44 +13:00
Peter Kay
51ba47c6a6
Update gps.rst ( #2704 )
...
Multiple typos corrected
2023-02-26 23:00:46 +01:00
Jesse Hills
68da2f6686
Add friendly name to docs ( #2707 )
2023-02-26 21:46:01 +13:00
Andreas Hergert
c0b17e0477
Added energy sensor to pzemdc ( #2177 )
...
Co-authored-by: Andreas <andreas.hergert@otrs.com>
2023-02-23 18:38:48 +01:00
Yaroslav Heriatovych
ac71defd45
Add haier climate component ( #2431 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-23 15:05:54 +13:00
H. Árkosi Róbert
06b374db5c
Documentation for kuntze component ( #2411 )
2023-02-23 14:31:59 +13:00
Jesse Hills
b101a1e80e
Merge branch 'current' into next
2023-02-23 13:41:40 +13:00
Shreyas Karnik
b6adcdb0cc
add person sensor (sen21231) from useful sensors ( #2678 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-23 13:37:47 +13:00
Samuel Sieb
5b69264802
clarify matrix keypad pin requirements ( #2694 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-02-22 21:43:07 +01:00
Keith Burzinski
cfc56b9c00
Sprinkler docs v2 update ( #2510 )
...
* Sprinkler docs v2 update
* Correction
* Polishing up
* Fixing some links
* Add 'Understanding the Sprinkler Controller's State' section
* Shorten text in examples
* Fix example, syntax highlighting
* Add divider to action index, other copy tweaks
* Document unit_of_measurement use
2023-02-21 19:48:02 -06:00
Fabian
52b2e857ea
Add Mopeka standard to next docs. ( #2624 )
...
Co-authored-by: Your Name <you@example.com>
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-22 10:49:15 +13:00
Jesse Hills
e710582826
Add docs for split visual temperature step ( #2691 )
2023-02-21 11:22:46 +13:00
WJCarpenter
83aba51528
ens210 must be lowercase ( #2690 )
2023-02-20 16:44:14 +13:00
Mat931
a060225575
Add internal_temperature component ( #2611 )
...
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2023-02-20 16:43:15 +13:00
irtimaled
9c2d56d80c
Support for color types on Tuya light ( #2686 )
2023-02-20 16:43:06 +13:00
Christoph Wagner
8ab17f6aaa
Fixed prdouct url ( #2674 )
...
Old one was https://senseair.com/products/size-counts/senseair-s8-residential/ and redirects to their landing page
2023-02-18 08:07:04 +01:00
Sven Serlier
9300ddced3
Fix SEN5X datasheet URL ( #2683 )
...
* Fix SEN5X datasheet URL
* Fix sen5x engineering guidelines URL
2023-02-18 08:05:56 +01:00
Sven Serlier
218df09ae3
Fix CT clamp API URL ( #2684 )
2023-02-18 08:05:11 +01:00
H. Árkosi Róbert
8284ca6508
Update index.rst ( #2677 )
2023-02-16 14:53:19 +01:00
H. Árkosi Róbert
efe999bce9
Update sigma_delta.rst ( #2676 )
2023-02-16 14:48:44 +01:00
H. Árkosi Róbert
ab4edcf1aa
Update pid.rst ( #2675 )
2023-02-16 14:45:55 +01:00
Jesse Hills
a9b69cb5d4
Merge branch 'current' into beta
2023-02-15 19:28:58 +13:00
Michael Boulding
37d4e88a3d
Update example to use Color::BLACK not COLOR_BLACK ( #2670 )
...
COLOR_BLACK now generates a deprecation warning, update the example to use the recommended name.
2023-02-14 21:58:55 +01:00
Sergey Dudanov
1b65ed1d8b
Issue3914 ( #2665 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-14 13:59:52 +13:00
Jesse Hills
cedde31334
Merge branch 'current' into beta
2023-02-14 13:59:38 +13:00
Sven Serlier
aac1c4e498
Update sgp30 URL ( #2636 )
2023-02-13 07:24:13 +01:00
NP v/d Spek
eed3d41024
Nvds display clipping ( #2659 )
...
* Adding documentation about Clipping
* add example
2023-02-13 11:54:31 +13:00
Cossid
5dbd8210ee
LED Drivers - Fix typo ( #2657 )
2023-02-13 11:54:31 +13:00
Jesse Hills
b4ef1452a5
Merge branch 'current' into beta
2023-02-13 11:54:18 +13:00
meijerwynand
e3e8c274b0
Update hdc1080.rst ( #2652 )
...
HDC1080 library compatible with CHT8305
2023-02-12 21:18:07 +01:00
Eric van Blokland
53bffad94f
Added documentation for the CanalSat and CanalSatLD codec ( #2318 )
...
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2023-02-09 13:22:09 +13:00
Jesse Hills
a5710689b6
Add note about startup time for mics4514 ( #2650 )
2023-02-09 12:52:51 +13:00
jmichiel
726e70ab8c
Add preset MQTT topics + remove away mode refs ( #2641 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-09 12:46:02 +13:00
Jesse Hills
a6fff4b5f2
Merge branch 'current' into next
2023-02-08 23:37:59 +00:00
Michael Muré
04882129e9
climate: add support for quiet fan speed ( #2160 )
2023-02-09 11:28:20 +13:00
Bob Perciaccante
dc07be64ce
Update mopeka_pro_check documentation to support Lippert devices ( #2493 )
2023-02-09 11:07:58 +13:00
Jesse Hills
300c55bc1f
Add JL1101 to ethernet docs ( #2649 )
2023-02-07 12:55:01 +13:00
H. Árkosi Róbert
11528c83e9
Documentation for vbus component ( #2397 )
...
Co-authored-by: Samuel Sieb <samuel-github@sieb.net>
Co-authored-by: Samuel Sieb <samuel@sieb.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-07 12:17:19 +13:00
sebcaps
be05682b3b
Add documentation for LD2410 ( #2385 )
...
Co-authored-by: Richard North <rich.north@gmail.com>
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-02-07 11:47:51 +13:00
Noxmiles
f3fb438652
Update ccs811.rst ( #2549 )
...
* Update ccs811.rst
* Update ccs811.rst
---------
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2023-02-05 19:47:22 +00:00
lillborje71
798b47dc5c
Update index.rst ( #2574 )
...
* Update index.rst
* Update index.rst
* Update index.rst
* Update index.rst
---------
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2023-02-05 20:39:25 +01:00
mistrjirka
764155d5e5
Removing information that after some testing isn't true ( #2568 )
...
Raspberry pico W is supported, but the vanilla raspberry pico clearly is not. After trying "rpipico" as a board this error shows up "Error: Unknown board ID 'rpipico'". It is bit misleading, because from what I know about esphome you cannot just have a device that communicates through USB and doesn't connect to WiFi.
I think it is important to understand that RP2040 isn't like ESP. Every RP2040 board doesn't support esphome, but basically any ESP device can support esphome.
2023-02-05 20:36:50 +01:00
sebcaps
4e8fa5c131
Update dallas.rst ( #2570 )
...
Fix mini resolution from 8 to 9, to comply with datasheet and component validation rules
2023-02-05 20:34:37 +01:00
Jan Pieter Waagmeester
880085fa33
Fix list layout for Graph>'Trace specific fields' ( #2577 )
2023-02-05 20:31:35 +01:00
xyzroe
5d870401ff
Examples of Daly BMS control using uart.write ( #2584 )
...
* Update daly_bms.rst
Add a couple of examples of Daly BMS control using uart.write
* Examples of Daly BMS control using uart.write
fixed lint errors
* Examples of Daly BMS control using uart.write
probably fixed lint errors
* Fixed every boot up battery level setup
2023-02-05 20:29:30 +01:00
Mike Ellis
a34f2c8679
Update st7789v.rst ( #2622 )
...
* Update st7789v.rst
Modified to allow dimmable control of the backlight (using GPIO4)
* Update st7789v.rst
---------
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2023-02-05 19:28:12 +00:00
backcountrymountains
fd4fd55333
Alternative Costco Feit A19 Bulb config ( #2591 )
...
I have a Costco Feit A19 that is similar but different. It is actually a RGBCT. I was wondering if we could post it here or otherwise make clear that there are alternate configs for Feit A19 bulbs. Maybe just warning people that there are several models of Feit A19 RGB/white bulbs is enough to not confuse people like me that used the sample code. Also, whoTF makes 2 nearly identical bulbs but with different pinouts WTF is that about, Feit electric?
My change is to the pins of the sm16716 and changing it to an RGBCT bulb.
2023-02-05 20:27:57 +01:00
RubyBailey
9f7b9e83a9
Onboard USB chip may interfere with deep sleep. ( #2627 )
...
* Update deep_sleep.rst
Added note to explain that onboard USB chip may interfere with deep sleep.
* Update deep_sleep.rst
Added note to explain potential with deep sleep on some ESP8266
* Update deep_sleep.rst
2023-02-05 20:21:00 +01:00
Antonio Fiol
a3bdd1ff5d
Added example with the expanded form for file ( #2635 )
...
Added one example where file does not use the short form, but the YAML expanded one described below the examples.
2023-02-05 20:10:26 +01:00
TechSmart Solutions
60233fccf8
Update index.rst ( #2643 )
2023-02-05 10:19:11 +01:00
usernames122
923db447a1
Add comma ( #2629 )
...
You forgot a comma, so i fixed it for you.
2023-02-04 21:22:50 +01:00
Florian Trück
07f6b30cc1
Update SCD30 sensor documentation ( #2631 )
2023-02-03 21:13:31 +13:00
Joakim Plate
703aada7da
Add initial docs for mdns extensions ( #2553 )
2023-02-02 17:19:00 +13:00
@RubenKelevra
3d6bfec6dd
sensor index: add missing commas ( #2639 )
2023-02-01 16:24:37 -08:00
Jannick
b4aa44d564
Correct signed and unsigned data type descriptions ( #2637 )
...
- S_QWORD from unsigned to signed 64 bit
- U_QWORD_R twice
2023-02-01 07:36:34 +01:00
WitchKing
a55a071a7c
Added documentation in order to use ADS1015 ( #2581 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-01-26 17:21:07 +13:00
Jesse Hills
c8fefadfa4
Merge branch 'current' into next
2023-01-26 14:59:51 +13:00
Jesse Hills
ba2bcccdf3
Add improv serial next_url ( #2620 )
2023-01-25 14:37:03 +13:00
Jesse Hills
b7a6bc4d78
Add documentation for MiCS 4514 ( #2605 )
2023-01-25 09:58:48 +13:00
Guillermo Ruffino
8b7fcf2313
Format-fixes-202211 ( #2461 )
2023-01-24 14:56:46 -03:00
NP v/d Spek
8a18636d4b
Add missing font: component to example. ( #2614 )
...
Co-authored-by: Samuel Sieb <samuel-github@sieb.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
fixes https://github.com/esphome/issues/issues/4065
2023-01-24 15:27:16 +13:00
Jesse Hills
4171ba1fb4
Fix display font and static text ref ( #2618 )
2023-01-24 14:35:06 +13:00
Jesse Hills
f858439867
Move password to bottom of list and add deprecated label ( #2617 )
2023-01-24 14:34:58 +13:00
H. Árkosi Róbert
a7f83576f9
Fix order ( #2615 )
2023-01-23 22:31:20 +01:00
Jesse Hills
528ccd2e65
Merge branch 'current' into next
2023-01-24 08:30:14 +13:00
Antonio
13a7cdc5f4
Update ethernet.rst ( #2612 )
...
Include LILYGO TTGO T-Internet ESP32-WROVER-E LAN8270 configuration
2023-01-23 07:29:48 +01:00
Jesse Hills
8c3d9b5b8b
Merge branch 'current' into next
2023-01-23 09:06:03 +13:00
Nejc
dd5bc51973
Update pcf8574.rst ( #2608 )
...
* Update pcf8574.rst
* Update components/pcf8574.rst
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-01-22 08:50:58 +13:00
Jesse Hills
96308aeb57
Merge branch 'current' into next
2023-01-20 18:33:02 +13:00
Lukas Schulte
50171271cc
addded: BME680 IAQ Class ( #2593 )
...
* addded: BME680 IAQ Class
* fixed: yaml layout
* fixed: some iaq values has result in an error
* Update bme680_bsec.rst
* Update bme680_bsec.rst
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2023-01-19 19:42:35 +01:00
billthe4th
7453de6ae2
Fix esp32-arduino_framework ref ( #2587 )
2023-01-19 14:59:17 +01:00
H. Árkosi Róbert
110080c3f4
Revert "Added power negative filter example - very useful ( #2595 )" ( #2604 )
...
This reverts commit db7c4b4c59
2023-01-19 14:33:24 +01:00
Chester
db7c4b4c59
Added power negative filter example - very useful ( #2595 )
2023-01-19 14:30:58 +01:00
jensgraef
1659578643
Fix typo in text-sensor documentation ( #2601 )
2023-01-19 13:47:53 +01:00
Jesse Hills
21a01eee50
Fix link to mqtt base component config ( #2603 )
2023-01-19 09:49:06 +13:00
H. Árkosi Róbert
b84eb16038
Documentation for wiegand component ( #2424 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-01-18 14:37:57 +13:00
Valentin Ochs
52e7be2e97
Documentation for sigma_delta_output component ( #2500 )
...
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2023-01-18 13:42:36 +13:00
Stanislav Habich
833d2d783a
Updated documentation for pca9685 ( #2325 )
2023-01-18 13:00:39 +13:00
Mathias Stock
d0378c71b8
Add support for EE895, HTE501 and TEE501 sensors ( #2241 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2023-01-18 10:43:20 +13:00
Z3LIFF
170f9fa40b
add "actual_gain" information ( #2600 )
2023-01-18 10:17:35 +13:00
H. Árkosi Róbert
9c5afcbec1
Documentation for key_collector component ( #2426 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2023-01-17 17:18:42 +13:00
martin jonasson
9b3096fa2f
Spelling mistake public/publish ( #2594 )
2023-01-14 14:24:17 -08:00
Antonio Fiol
101ead9279
Fix API reference link ( #2586 )
2023-01-11 10:09:55 +01:00
