esphome/esphome/components/vl53l0x/sensor.py

import esphome.codegen as cg
import esphome.config_validation as cv
from esphome.components import i2c, sensor
from esphome.const import (CONF_ID, UNIT_METER, ICON_ARROW_EXPAND_VERTICAL, CONF_ADDRESS,
                           CONF_TIMEOUT, CONF_ENABLE_PIN)
from esphome import pins

DEPENDENCIES = ['i2c']

vl53l0x_ns = cg.esphome_ns.namespace('vl53l0x')
VL53L0XSensor = vl53l0x_ns.class_('VL53L0XSensor', sensor.Sensor, cg.PollingComponent,
                                  i2c.I2CDevice)

CONF_SIGNAL_RATE_LIMIT = 'signal_rate_limit'
CONF_LONG_RANGE = 'long_range'


def check_keys(obj):
    if obj[CONF_ADDRESS] != 0x29 and CONF_ENABLE_PIN not in obj:
        msg = "Address other then 0x29 requires enable_pin definition to allow sensor\r"
        msg += "re-addressing. Also if you have more then one VL53 device on the same\r"
        msg += "i2c bus, then all VL53 devices must have enable_pin defined."
        raise cv.Invalid(msg)
    return obj


def check_timeout(value):
    value = cv.positive_time_period_microseconds(value)
    if value.total_seconds > 60:
        raise cv.Invalid("Maximum timeout can not be greater then 60 seconds")
    return value


CONFIG_SCHEMA = cv.All(sensor.sensor_schema(UNIT_METER, ICON_ARROW_EXPAND_VERTICAL, 2).extend({
        cv.GenerateID(): cv.declare_id(VL53L0XSensor),
        cv.Optional(CONF_SIGNAL_RATE_LIMIT, default=0.25): cv.float_range(
            min=0.0, max=512.0, min_included=False, max_included=False),
        cv.Optional(CONF_LONG_RANGE, default=False): cv.boolean,
        cv.Optional(CONF_TIMEOUT, default='10ms'): check_timeout,
        cv.Optional(CONF_ENABLE_PIN): pins.gpio_output_pin_schema,
    }).extend(cv.polling_component_schema('60s')).extend(i2c.i2c_device_schema(0x29)), check_keys)


def to_code(config):
    var = cg.new_Pvariable(config[CONF_ID])
    yield cg.register_component(var, config)
    cg.add(var.set_signal_rate_limit(config[CONF_SIGNAL_RATE_LIMIT]))
    cg.add(var.set_long_range(config[CONF_LONG_RANGE]))
    cg.add(var.set_timeout_us(config[CONF_TIMEOUT]))

    if CONF_ENABLE_PIN in config:
        enable = yield cg.gpio_pin_expression(config[CONF_ENABLE_PIN])
        cg.add(var.set_enable_pin(enable))

    yield sensor.register_sensor(var, config)
    yield i2c.register_i2c_device(var, config)