esphome/tests/test4.yaml

esphome:
  name: $devicename
  platform: ESP32
  board: nodemcu-32s
  build_path: build/test4

substitutions:
  devicename: test-4

ethernet:
  type: LAN8720
  mdc_pin: GPIO23
  mdio_pin: GPIO25
  clk_mode: GPIO0_IN
  phy_addr: 0
  power_pin: GPIO25
  manual_ip:
    static_ip: 192.168.178.56
    gateway: 192.168.178.1
    subnet: 255.255.255.0
  domain: .local

api:

i2c:
  sda: 21
  scl: 22
  scan: False

spi:
  clk_pin: GPIO21
  mosi_pin: GPIO22
  miso_pin: GPIO23

uart:
  tx_pin: GPIO22
  rx_pin: GPIO23
  baud_rate: 115200

ota:
  safe_mode: True
  port: 3286

logger:
  level: DEBUG

web_server:
  ota: false
  auth:
    username: admin
    password: admin
  include_internal: true

time:
  - platform: sntp
    id: sntp_time

tuya:
  time_id: sntp_time

pipsolar:
    id: inverter0

sx1509:
  - id: sx1509_hub
    address: 0x3E

mcp3204:
  cs_pin: GPIO23

sensor:
  - platform: homeassistant
    entity_id: sensor.hello_world
    id: ha_hello_world
  - platform: tuya
    id: tuya_sensor
    sensor_datapoint: 1
  - platform: pipsolar
    pipsolar_id: inverter0
    grid_rating_voltage:
      id: inverter0_grid_rating_voltage
      name: inverter0_grid_rating_voltage
    grid_rating_current:
      id: inverter0_grid_rating_current
      name: inverter0_grid_rating_current
    ac_output_rating_voltage:
      id: inverter0_ac_output_rating_voltage
      name: inverter0_ac_output_rating_voltage
    ac_output_rating_frequency:
      id: inverter0_ac_output_rating_frequency
      name: inverter0_ac_output_rating_frequency
    ac_output_rating_current:
      id: inverter0_ac_output_rating_current
      name: inverter0_ac_output_rating_current
    ac_output_rating_apparent_power:
      id: inverter0_ac_output_rating_apparent_power
      name: inverter0_ac_output_rating_apparent_power
    ac_output_rating_active_power:
      id: inverter0_ac_output_rating_active_power
      name: inverter0_ac_output_rating_active_power
    battery_rating_voltage:
      id: inverter0_battery_rating_voltage
      name: inverter0_battery_rating_voltage
    battery_recharge_voltage:
      id: inverter0_battery_recharge_voltage
      name: inverter0_battery_recharge_voltage
    battery_under_voltage:
      id: inverter0_battery_under_voltage
      name: inverter0_battery_under_voltage
    battery_bulk_voltage:
      id: inverter0_battery_bulk_voltage
      name: inverter0_battery_bulk_voltage
    battery_float_voltage:
      id: inverter0_battery_float_voltage
      name: inverter0_battery_float_voltage
    battery_type:
      id: inverter0_battery_type
      name: inverter0_battery_type
    current_max_ac_charging_current:
      id: inverter0_current_max_ac_charging_current
      name: inverter0_current_max_ac_charging_current
    current_max_charging_current:
      id: inverter0_current_max_charging_current
      name: inverter0_current_max_charging_current
    input_voltage_range:
      id: inverter0_input_voltage_range
      name: inverter0_input_voltage_range
    output_source_priority:
      id: inverter0_output_source_priority
      name: inverter0_output_source_priority
    charger_source_priority:
      id: inverter0_charger_source_priority
      name: inverter0_charger_source_priority
    parallel_max_num:
      id: inverter0_parallel_max_num
      name: inverter0_parallel_max_num
    machine_type:
      id: inverter0_machine_type
      name: inverter0_machine_type
    topology:
      id: inverter0_topology
      name: inverter0_topology
    output_mode:
      id: inverter0_output_mode
      name: inverter0_output_mode
    battery_redischarge_voltage:
      id: inverter0_battery_redischarge_voltage
      name: inverter0_battery_redischarge_voltage
    pv_ok_condition_for_parallel:
      id: inverter0_pv_ok_condition_for_parallel
      name: inverter0_pv_ok_condition_for_parallel
    pv_power_balance:
      id: inverter0_pv_power_balance
      name: inverter0_pv_power_balance
    grid_voltage:
      id: inverter0_grid_voltage
      name: inverter0_grid_voltage
    grid_frequency:
      id: inverter0_grid_frequency
      name: inverter0_grid_frequency
    ac_output_voltage:
      id: inverter0_ac_output_voltage
      name: inverter0_ac_output_voltage
    ac_output_frequency:
      id: inverter0_ac_output_frequency
      name: inverter0_ac_output_frequency
    ac_output_apparent_power:
      id: inverter0_ac_output_apparent_power
      name: inverter0_ac_output_apparent_power
    ac_output_active_power:
      id: inverter0_ac_output_active_power
      name: inverter0_ac_output_active_power
    output_load_percent:
      id: inverter0_output_load_percent
      name: inverter0_output_load_percent
    bus_voltage:
      id: inverter0_bus_voltage
      name: inverter0_bus_voltage
    battery_voltage:
      id: inverter0_battery_voltage
      name: inverter0_battery_voltage
    battery_charging_current:
      id: inverter0_battery_charging_current
      name: inverter0_battery_charging_current
    battery_capacity_percent:
      id: inverter0_battery_capacity_percent
      name: inverter0_battery_capacity_percent
    inverter_heat_sink_temperature:
      id: inverter0_inverter_heat_sink_temperature
      name: inverter0_inverter_heat_sink_temperature
    pv_input_current_for_battery:
      id: inverter0_pv_input_current_for_battery
      name: inverter0_pv_input_current_for_battery
    pv_input_voltage:
      id: inverter0_pv_input_voltage
      name: inverter0_pv_input_voltage
    battery_voltage_scc:
      id: inverter0_battery_voltage_scc
      name: inverter0_battery_voltage_scc
    battery_discharge_current:
      id: inverter0_battery_discharge_current
      name: inverter0_battery_discharge_current
    battery_voltage_offset_for_fans_on:
      id: inverter0_battery_voltage_offset_for_fans_on
      name: inverter0_battery_voltage_offset_for_fans_on
    eeprom_version:
      id: inverter0_eeprom_version
      name: inverter0_eeprom_version
    pv_charging_power:
      id: inverter0_pv_charging_power
      name: inverter0_pv_charging_power
  - platform: "hrxl_maxsonar_wr"
    name: "Rainwater Tank Level"
    filters:
      - sliding_window_moving_average:
          window_size: 12
          send_every: 12
      - or:
        - throttle: "20min"
        - delta: 0.02
  - platform: mcp3204
    name: "MCP3204 Pin 1"
    number: 1
    id: mcp_sensor
  - platform: copy
    source_id: mcp_sensor
    name: "MCP binary sensor copy"

#
# platform sensor.apds9960 requires component apds9960
#
#  - platform: apds9960
#    type: proximity
#    name: APDS9960 Proximity
#  - platform: apds9960
#    type: clear
#    name: APDS9960 Clear
#  - platform: apds9960
#    type: red
#    name: APDS9960 Red
#  - platform: apds9960
#    type: green
#    name: APDS9960 Green
#  - platform: apds9960
#    type: blue
#    name: APDS9960 Blue

binary_sensor:
  - platform: tuya
    id: tuya_binary_sensor
    sensor_datapoint: 1
  - platform: pipsolar
    pipsolar_id: inverter0
    add_sbu_priority_version:
      id: inverter0_add_sbu_priority_version
      name: inverter0_add_sbu_priority_version
    configuration_status:
      id: inverter0_configuration_status
      name: inverter0_configuration_status
    scc_firmware_version:
      id: inverter0_scc_firmware_version
      name: inverter0_scc_firmware_version
    load_status:
      id: inverter0_load_status
      name: inverter0_load_status
    battery_voltage_to_steady_while_charging:
      id: inverter0_battery_voltage_to_steady_while_charging
      name: inverter0_battery_voltage_to_steady_while_charging
    charging_status:
      id: inverter0_charging_status
      name: inverter0_charging_status
    scc_charging_status:
      id: inverter0_scc_charging_status
      name: inverter0_scc_charging_status
    ac_charging_status:
      id: inverter0_ac_charging_status
      name: inverter0_ac_charging_status
    charging_to_floating_mode:
      id: inverter0_charging_to_floating_mode
      name: inverter0_charging_to_floating_mode
    switch_on:
      id: inverter0_switch_on
      name: inverter0_switch_on
    dustproof_installed:
      id: inverter0_dustproof_installed
      name: inverter0_dustproof_installed
    silence_buzzer_open_buzzer:
      id: inverter0_silence_buzzer_open_buzzer
      name: inverter0_silence_buzzer_open_buzzer
    overload_bypass_function:
      id: inverter0_overload_bypass_function
      name: inverter0_overload_bypass_function
    lcd_escape_to_default:
      id: inverter0_lcd_escape_to_default
      name: inverter0_lcd_escape_to_default
    overload_restart_function:
      id: inverter0_overload_restart_function
      name: inverter0_overload_restart_function
    over_temperature_restart_function:
      id: inverter0_over_temperature_restart_function
      name: inverter0_over_temperature_restart_function
    backlight_on:
      id: inverter0_backlight_on
      name: inverter0_backlight_on
  - platform: template
    id: ar1
    lambda: 'return {};'
    filters:
      - autorepeat:
        - delay: 2s
          time_off: 100ms
          time_on: 900ms
        - delay: 4s
          time_off: 100ms
          time_on: 400ms
    on_state:
      then:
        - lambda: 'ESP_LOGI("ar1:", "%d", x);'
  - platform: xpt2046
    xpt2046_id: xpt_touchscreen
    id: touch_key0
    x_min: 80
    x_max: 160
    y_min: 106
    y_max: 212
    on_state:
      - lambda: 'ESP_LOGI("main", "key0: %s", (x ? "touch" : "release"));'
  - platform: gpio
    name: GPIO SX1509 test
    pin:
      sx1509: sx1509_hub
      number: 3

  - platform: touchscreen
    touchscreen_id: lilygo_touchscreen
    id: touch_key1
    x_min: 0
    x_max: 100
    y_min: 0
    y_max: 100
    on_press:
      - logger.log: "Touched"


climate:
  - platform: tuya
    id: tuya_climate
    switch_datapoint: 1
    target_temperature_datapoint: 3
    current_temperature_multiplier: 0.5
    target_temperature_multiplier: 0.5

switch:
  - platform: tuya
    id: tuya_switch
    switch_datapoint: 1
  - platform: pipsolar
    pipsolar_id: inverter0
    output_source_priority_utility:
      name: inverter0_output_source_priority_utility
    output_source_priority_solar:
      name: inverter0_output_source_priority_solar
    output_source_priority_battery:
      name: inverter0_output_source_priority_battery
    input_voltage_range:
      name: inverter0_input_voltage_range
    pv_ok_condition_for_parallel:
      name: inverter0_pv_ok_condition_for_parallel
    pv_power_balance:
      name: inverter0_pv_power_balance
  - platform: copy
    source_id: tuya_switch
    name: Tuya Switch Copy

light:
  - platform: fastled_clockless
    id: led_matrix_32x8
    name: "led_matrix_32x8"
    chipset: WS2812B
    pin: GPIO15
    num_leds: 256
    rgb_order: GRB
    default_transition_length: 0s
    color_correct: [50%, 50%, 50%]
  - platform: tuya
    id: tuya_light
    switch_datapoint: 1
    dimmer_datapoint: 2
    min_value_datapoint: 3
    color_temperature_datapoint: 4
    min_value: 1
    max_value: 100
    cold_white_color_temperature: 153 mireds
    warm_white_color_temperature: 500 mireds
    gamma_correct: 1

cover:
  - platform: tuya
    id: tuya_cover
    position_datapoint: 2
  - platform: copy
    source_id: tuya_cover
    name: "Tuya Cover copy"

display:
  - platform: addressable_light
    id: led_matrix_32x8_display
    addressable_light_id: led_matrix_32x8
    width: 32
    height: 8
    pixel_mapper: |-
      if (x % 2 == 0) {
        return (x * 8) + y;
      }
      return (x * 8) + (7 - y);
    lambda: |-
      Color red = Color(0xFF0000);
      Color green = Color(0x00FF00);
      Color blue = Color(0x0000FF);
      it.rectangle(0, 0, it.get_width(), it.get_height(), red);
      it.rectangle(1, 1, it.get_width()-2, it.get_height()-2, green);
      it.rectangle(2, 2, it.get_width()-4, it.get_height()-4, blue);
      it.rectangle(3, 3, it.get_width()-6, it.get_height()-6, red);
    rotation: 0°
    update_interval: 16ms

  - platform: waveshare_epaper
    cs_pin: GPIO23
    dc_pin: GPIO23
    busy_pin: GPIO23
    reset_pin: GPIO23
    model: 2.13in-ttgo-b1
    full_update_every: 30
    lambda: |-
      it.rectangle(0, 0, it.get_width(), it.get_height());
  - platform: waveshare_epaper
    cs_pin: GPIO23
    dc_pin: GPIO23
    busy_pin: GPIO23
    reset_pin: GPIO23
    model: 2.90in
    full_update_every: 30
    reset_duration: 200ms
    lambda: |-
      it.rectangle(0, 0, it.get_width(), it.get_height());
  - platform: waveshare_epaper
    cs_pin: GPIO23
    dc_pin: GPIO23
    busy_pin: GPIO23
    reset_pin: GPIO23
    model: 2.90inv2
    full_update_every: 30
    lambda: |-
      it.rectangle(0, 0, it.get_width(), it.get_height());
  - platform: inkplate6
    id: inkplate_display
    greyscale: false
    partial_updating: false
    update_interval: 60s

    ckv_pin: GPIO1
    sph_pin: GPIO1
    gmod_pin: GPIO1
    gpio0_enable_pin: GPIO1
    oe_pin: GPIO1
    spv_pin: GPIO1
    powerup_pin: GPIO1
    wakeup_pin: GPIO1
    vcom_pin: GPIO1

number:
  - platform: tuya
    id: tuya_number
    number_datapoint: 102
    min_value: 0
    max_value: 17
    step: 1
  - platform: copy
    source_id: tuya_number
    name: Tuya Number Copy

text_sensor:
  - platform: pipsolar
    pipsolar_id: inverter0
    device_mode:
      id: inverter0_device_mode
      name: inverter0_device_mode
    last_qpigs:
      id: inverter0_last_qpigs
      name: inverter0_last_qpigs
    last_qpiri:
      id: inverter0_last_qpiri
      name: inverter0_last_qpiri
    last_qmod:
      id: inverter0_last_qmod
      name: inverter0_last_qmod
    last_qflag:
      id: inverter0_last_qflag
      name: inverter0_last_qflag
  - platform: copy
    source_id: inverter0_device_mode
    name: "Inverter Text Sensor Copy"

output:
  - platform: pipsolar
    pipsolar_id: inverter0
    battery_recharge_voltage:
      id: inverter0_battery_recharge_voltage_out
esp32_camera:
  name: ESP-32 Camera
  data_pins: [GPIO17, GPIO35, GPIO34, GPIO5, GPIO39, GPIO18, GPIO36, GPIO19]
  vsync_pin: GPIO22
  href_pin: GPIO26
  pixel_clock_pin: GPIO21
  external_clock:
    pin: GPIO27
    frequency: 20MHz
  i2c_pins:
    sda: GPIO25
    scl: GPIO23
  reset_pin: GPIO15
  power_down_pin: GPIO1
  resolution: 640x480
  jpeg_quality: 10

esp32_camera_web_server:
  - port: 8080
    mode: stream
  - port: 8081
    mode: snapshot

external_components:
  - source: github://esphome/esphome@dev
    refresh: 1d
    components: ["bh1750"]
  - source: ../esphome/components
    components: ["sntp"]
xpt2046:
  id: xpt_touchscreen
  cs_pin: 17
  irq_pin: 16
  update_interval: 50ms
  report_interval: 1s
  threshold: 400
  dimension_x: 240
  dimension_y: 320
  calibration_x_min: 3860
  calibration_x_max: 280
  calibration_y_min: 340
  calibration_y_max: 3860
  swap_x_y: False
  on_state:
    - lambda: |-
        ESP_LOGI("main", "args x=%d, y=%d, touched=%s", x, y, (touched ? "touch" : "release"));
        ESP_LOGI("main", "member x=%d, y=%d, touched=%d, x_raw=%d, y_raw=%d, z_raw=%d",
            id(xpt_touchscreen).x,
            id(xpt_touchscreen).y,
            (int) id(xpt_touchscreen).touched,
            id(xpt_touchscreen).x_raw,
            id(xpt_touchscreen).y_raw,
            id(xpt_touchscreen).z_raw
            );

button:
  - platform: restart
    name: Restart Button
  - platform: safe_mode
    name: Safe Mode Button
  - platform: shutdown
    name: Shutdown Button
    id: shutdown_btn
  - platform: copy
    source_id: shutdown_btn
    name: Shutdown Button Copy


touchscreen:
  - platform: ektf2232
    interrupt_pin: GPIO36
    rts_pin: GPIO5
    display: inkplate_display
    on_touch:
      - logger.log:
          format: Touch at (%d, %d)
          args: ["touch.x", "touch.y"]

  - platform: lilygo_t5_47
    id: lilygo_touchscreen
    interrupt_pin: GPIO36
    display: inkplate_display
    on_touch:
      - logger.log:
          format: Touch at (%d, %d)
          args: ["touch.x", "touch.y"]