Otto Winter
ac0d921413
ESP-IDF support and generic target platforms ( #2303 )
...
* Socket refactor and SSL
* esp-idf temp
* Fixes
* Echo component and noise
* Add noise API transport support
* Updates
* ESP-IDF
* Complete
* Fixes
* Fixes
* Versions update
* New i2c APIs
* Complete i2c refactor
* SPI migration
* Revert ESP Preferences migration, too complex for now
* OTA support
* Remove echo again
* Remove ssl again
* GPIOFlags updates
* Rename esphal and ICACHE_RAM_ATTR
* Make ESP32 arduino compilable again
* Fix GPIO flags
* Complete pin registry refactor and fixes
* Fixes to make test1 compile
* Remove sdkconfig file
* Ignore sdkconfig file
* Fixes in reviewing
* Make test2 compile
* Make test4 compile
* Make test5 compile
* Run clang-format
* Fix lint errors
* Use esp-idf APIs instead of btStart
* Another round of fixes
* Start implementing ESP8266
* Make test3 compile
* Guard esp8266 code
* Lint
* Reformat
* Fixes
* Fixes v2
* more fixes
* ESP-IDF tidy target
* Convert ARDUINO_ARCH_ESPxx
* Update WiFiSignalSensor
* Update time ifdefs
* OTA needs millis from hal
* RestartSwitch needs delay from hal
* ESP-IDF Uart
* Fix OTA blank password
* Allow setting sdkconfig
* Fix idf partitions and allow setting sdkconfig from yaml
* Re-add read/write compat APIs and fix esp8266 uart
* Fix esp8266 store log strings in flash
* Fix ESP32 arduino preferences not initialized
* Update ifdefs
* Change how sdkconfig change is detected
* Add checks to ci-custom and fix them
* Run clang-format
* Add esp-idf clang-tidy target and fix errors
* Fixes from clang-tidy idf round 2
* Fixes from compiling tests with esp-idf
* Run clang-format
* Switch test5.yaml to esp-idf
* Implement ESP8266 Preferences
* Lint
* Re-do PIO package version selection a bit
* Fix arduinoespressif32 package version
* Fix unit tests
* Lint
* Lint fixes
* Fix readv/writev not defined
* Fix graphing component
* Re-add all old options from core/config.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-20 11:47:51 +02:00
Oxan van Leeuwen
133a17d6eb
Add esphal.h include to inkplate6 component ( #2286 )
2021-09-13 16:55:01 +02:00
Otto Winter
a4867a00ea
Activate owning-memory clang-tidy check ( #1891 )
...
* Activate owning-memory clang-tidy check
* Lint
* Lint
* Fix issue with new NfcTag constructor
* Update pointers for number and select
* Add back the NOLINT to display buffer
* Fix merge
* DSMR fixes
* Nextion fixes
* Fix pipsolar
* Fix lwip socket
* Format
* Change socket fix
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-09-13 11:31:02 +02:00
Otto Winter
e5051eefbc
API encryption ( #2254 )
2021-09-09 09:22:47 +12:00
Sergey V. DUDANOV
4e120a291e
Midea support v2 ( #2188 )
2021-09-09 09:10:02 +12:00
dgtal1
b0533db2eb
Add new trigger to fan component on_speed_set ( #2246 )
2021-09-08 15:15:57 +12:00
Oxan van Leeuwen
54de0ca0da
Reject template select/number/switches that don't handle user input ( #2230 )
2021-09-04 14:46:53 +12:00
Chris Nussbaum
a4d024f43d
Add is_on and is_off conditions for the fan component ( #2225 )
...
Co-authored-by: Chris Nussbaum <chris.nussbaum@protolabs.com>
2021-09-02 12:16:11 +12:00
Petko Bordjukov
edcd88123d
iBeacon support for ble_presence ( #1627 )
2021-09-02 11:46:15 +12:00
Jérôme Laban
140ef791aa
Support for the AirThings Wave Plus ( #1656 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-31 14:00:30 +12:00
marsjan155
94b28102f5
Add st7920 display, ( #1440 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-26 14:33:03 +12:00
Otto Winter
1b89174558
Store source package in Component for debugging ( #2070 )
2021-08-24 06:49:19 +12:00
buxtronix
947c104eff
Support for AM43 BLE blind motors ( #1744 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Stefan Agner <stefan@agner.ch>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: René Klomp <rene@klomp.ws>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: Geoff Davis <geoff@geoffdavis.com>
Co-authored-by: Paulus Schoutsen <paulus@home-assistant.io>
Co-authored-by: dentra <dentra@users.noreply.github.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Franck Nijhof <frenck@frenck.nl>
Co-authored-by: Barry Loong <loongyh@users.noreply.github.com>
Co-authored-by: Sergey V. DUDANOV <sergey.dudanov@gmail.com>
Co-authored-by: Balazs Scheidler <bazsi77@gmail.com>
2021-08-11 16:07:10 +12:00
Andreas Hergert
d3375193a9
Feature pipsolar anh ( #1664 )
...
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-11 07:48:32 +12:00
Dave T
1771e673d2
Warn if underscore character is used in hostname ( #2079 )
...
* Prevent underscore character being used in 'name'.
* Restrict underscores in hostnames, not all names.
* Use hostname validator for node name.
* Allow underscore in hostname but warn once.
* Add renaming instructions link to warning.
* Point underscore warning to FAQ section
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-10 14:14:42 +02:00
Jesse Hills
d258e06fd7
Add rgbct and color_temperature light platforms ( #2138 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-08-10 21:28:56 +12:00
Stephen Tierney
6a2f0f5143
Add support for PMSA003i ( #1501 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: steve <steve@Hackintosh.local>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 11:00:16 +02:00
WJCarpenter
183e2a8471
Support component tsl2591 ( #2131 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
Co-authored-by: WJCarpenter <bill@carpenter.org>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 10:48:06 +02:00
Guillermo Ruffino
f26767b65e
Dsmr component ( #1881 )
...
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-08-10 10:32:16 +02:00
Keith Burzinski
98d32876b5
Thermostat enhancements 2 ( #2114 )
2021-08-10 10:16:44 +02:00
Tom Matheussen
b92311402a
Adds CGPR1 - Qingping Motion & Ambient light sensor support ( #1675 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-08-10 17:06:04 +12:00
Jesse Hills
93796491af
Allow entities to be disabled by default in HA ( #2113 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-10 13:45:31 +12:00
Keith Burzinski
90c0d3e12f
Add Toshiba AC generic IR remote protocol ( #2019 )
2021-08-10 13:21:10 +12:00
buxtronix
fe7af21c91
Anova fahrenheit support ( #2126 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
2021-08-09 08:05:36 +12:00
Andreas Hergert
6516c64e67
Add min_save_interval to total_energy/integration for memory wear ( #1665 )
...
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-03 16:41:34 +02:00
John "Warthog9" Hawley
fb24e55c8d
pmsx003: add standard particle, particle counts ( #1694 )
2021-08-02 10:32:08 +02:00
Jesse Hills
76991cdcc4
Add select entities and implement template select ( #2067 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-08-02 20:00:51 +12:00
Otto Winter
16dbbfabc6
Add demo integration ( #2085 )
2021-07-29 11:50:55 +02:00
Mike Meessen
ee19ef1aac
Add support for the HRXL MaxSonar WR series sensors ( #2020 )
2021-07-29 11:37:31 +02:00
Tyler Menezes
5e2d4e332a
Add T6615 ( #1170 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-29 11:24:36 +02:00
rnauber
c6c857dfff
Add support for the TLC5947 24-Channel, 12-Bit PWM LED Driver ( #2066 )
...
Co-authored-by: Richard Nauber <richard@nauber.dev>
2021-07-29 11:16:04 +02:00
Nicholas Peters
8dbac20f8b
Add SDP3x sensor ( #2064 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-07-29 10:57:52 +02:00
Stefan Agner
d9f09a7523
Initial ESP32-C3-DevKitM-1 board support ( #2062 )
...
Co-authored-by: Stijn Tintel <stijn@linux-ipv6.be>
2021-07-26 11:10:56 +02:00
Stefan Agner
159744e09e
Support library override using named library with repository ( #2056 )
2021-07-26 10:50:45 +02:00
Sourabh Jaiswal
acbb8e9fd0
Added support for Selec Energy Meter ( #1993 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-22 15:31:28 +12:00
Pasi Suominen
90394a50df
Added support for pvvx_mithermometer sensor ( #1546 )
...
Co-authored-by: Pasi Suominen <pasiz@pasizdesk.pasiz.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-22 15:21:08 +12:00
SenexCrenshaw
0651716b96
Nextion upload and sensors ( #1464 )
...
Co-authored-by: Senex Crenshaw <senexcrenshaw@gmail.com>
2021-07-15 12:51:15 +12:00
Jesse Hills
dd37a4e04c
Add Number entities (from Home Assistant) ( #1971 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-07-13 07:20:12 +12:00
Maurice Makaay
623570a117
Add state callback to ota component ( #1816 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-07-11 07:52:19 +12:00
buxtronix
ab31117bf3
Anova ble component ( #1752 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-05 11:59:12 +12:00
Adrián Panella
d31040f5d8
hlw8012: fix constants for BL0937 ( #1973 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-07-05 11:09:09 +12:00
Martin Weinelt
8ca34f7098
Bump hypothesis from 5.21.0 to 5.49.0 ( #1753 )
2021-07-05 10:10:59 +12:00
Otto Winter
bfca3f242a
Disallow power_save_mode NONE if used together with BLE ( #1950 )
2021-06-22 10:53:10 +02:00
Barry Loong
e5929225eb
Fix typo in test3.yaml ( #1928 )
2021-06-17 21:39:59 +12:00
Jesse Hills
5a2cfa2798
Move esp32_ble_server to its own component ( #1898 )
2021-06-12 08:31:15 +12:00
Jesse Hills
5cf18235e3
Allow setting creator project name and version into code ( #1872 )
2021-06-09 13:04:00 +12:00
Jesse Hills
a70a205ace
Improv - BLE WiFi provisioning ( #1807 )
...
Co-authored-by: Paulus Schoutsen <balloob@gmail.com>
2021-06-08 11:56:21 +12:00
Lumpusz
ebadaa9660
Add preset, custom_preset and custom_fan_mode support to climate ( #1471 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-04 22:04:54 +12:00
Franck Nijhof
11fb54c74e
Add support for Sensor state class ( #1835 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-03 13:49:56 +12:00
foxsam21
2b9350ce76
Added vol +/- control to dfplayer ( #1856 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-03 10:12:23 +12:00
Ryan Mounce
c3938d04f3
Support Tuya light color temperature control ( #1412 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-02 09:32:16 +12:00
David Kiliani
f968713be8
Add optional lambda to BLESensor for raw data parsing ( #1851 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-06-01 21:46:54 +12:00
0hax
afa436fe8f
teleinfo: use text_sensor and sensor. ( #1403 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto winter <otto@otto-winter.com>
2021-06-01 13:32:09 +12:00
Oxan van Leeuwen
25af5ab7c6
Drop 128x160 ESP-32 camera resolution ( #1813 )
2021-05-31 22:27:41 +12:00
Andrew Zaborowski
4d586b1446
Add CS5460A power-meter component ( #1474 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 16:07:33 +12:00
polyfaces
bb759d52c8
Add support for SDMXXX energy meters ( #1260 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 16:05:49 +12:00
Guillermo Ruffino
c79d700d03
Add validate to components ( #1631 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-31 10:06:45 +12:00
Oxan van Leeuwen
824f3187ac
Update platformio.ini settings and fix test apps ( #1815 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2021-05-25 07:47:45 +12:00
Stanislav Meduna
072dce340e
Add the on_page_change display trigger ( #1687 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-24 08:56:04 +12:00
Jesse Hills
4ffa68b773
Merge branch 'master' into dev
2021-05-19 14:02:04 +12:00
romerod
d3e291b442
Add on_tag_removed trigger to pn532 ( #1436 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-18 11:54:09 +12:00
Otto Winter
d4686c0fb1
Introduce new async-def coroutine syntax ( #1657 )
2021-05-17 17:14:15 +12:00
Jesse Hills
030c87d142
Allow RC522 components to have multiple configurations ( #1782 )
2021-05-17 13:53:35 +12:00
Stanislav Meduna
d0eaebe19f
Add support for the XPT2046 touchscreen controller ( #1542 )
2021-05-17 13:03:58 +12:00
Franck Nijhof
5645be4e0f
Add attribute support to Home Assistant sensors ( #1770 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-17 11:16:22 +12:00
Jesse Hills
7e3b8fd346
Allow RC522 components to have multiple configurations ( #1782 )
2021-05-15 17:02:52 +12:00
Jesse Hills
4f6982fbc5
Add action to set total pulses on pulse_meter ( #1757 )
2021-05-14 20:06:31 +12:00
Stanislav Meduna
00c144daeb
Autorepeat filter for the binary sensors ( #1681 )
...
* add the autorepeat filter
* add a test for the autorepeat filter
* make no timing equivalent to a single default one
2021-05-13 17:36:53 -03:00
BoukeHaarsma23
9e7acd6f75
Add sm2135 component ( #1736 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:17:13 +12:00
Yuval Aboulafia
7d9c043f1d
Use core constants for sample duration on bh1750 ( #1764 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:17:13 +12:00
BoukeHaarsma23
54660300e9
Add sm2135 component ( #1736 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-13 07:14:01 +12:00
Yuval Aboulafia
cdc9c99d40
Use core constants for sample duration on bh1750 ( #1764 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-12 10:16:59 +12:00
Jesse Hills
5c3af1d3f6
Allow duration for deep_sleep.enter to be templateable ( #1765 )
2021-05-11 12:36:14 -03:00
Jesse Hills
44562dbef1
Merge branch 'dev' into bump-1.18.0b1
2021-05-10 07:54:06 +12:00
Otto Winter
229bf719a2
Implement external custom components installing from YAML ( #1630 )
...
* Move components import loading to importlib MetaPathFinder and importlib.resources
* Add external_components component
* Fix
* Fix
* fix cv.url return
* fix validate shorthand git
* implement git refresh
* Use finders from sys.path_hooks instead of looking for __init__.py
* use github:// schema
* error handling
* add test
* fix handling git output
* revert file check handling
* fix test
* allow full component path be specified for local
* fix test
* fix path handling
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-05-07 15:02:17 -03:00
Farzad E
2225594ee8
Added an option to disable mDNS ( #1716 )
...
* Added an option to disable mDNS
* Fixed linter issues
* Moved the enable_mdns option to WiFi and Ethernet components
* extracted common method for add mdns library
* lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-05-06 12:31:42 -03:00
buxtronix
02aa75f68c
BLE client support on ESP32 ( #1177 )
...
Co-authored-by: Ben Buxton <bb@cactii.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-05-03 11:10:50 +12:00
Wojtek Strzalka
4ae4a4ee88
Support for TOF10120 distance sensor ( #1375 )
2021-04-29 11:49:46 +12:00
Barry Loong
4d7c1ae143
Add Grow Fingerprint Reader ( #1356 )
2021-04-29 10:08:27 +12:00
Stephen Tierney
7fb116d87d
Add support for SHT4X ( #1512 )
2021-04-28 20:22:46 +12:00
SenexCrenshaw
2033ac34e5
Sgp40 ( #1513 )
...
* Start of SGP40 dev
* Clean up
* Initial Commit
* VOC is working
* Fixed up sensor config
* Lint Fixes
Added in save/restore baseline
Noted original repo in header
* Lint Fixes
Added to test
* Lint Fixes
* Added additional check on restoring
* Removed double check
* Changed defines to static const double
* Changed defines to const
Do not send voc index until sensor stabilizes
* Fixed sensor stabilization message
* Fixup according to PR
* samples_read increment fix
* Fixed missing device class
* Choose a SENSOR device class
* Moved some sensors for tests
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-04-08 22:40:19 -03:00
Peter Kuehne
eaf9735eda
Disallow _ in node name ( #1632 )
2021-04-08 14:26:01 +02:00
rbaron
bf01c22e1f
Adds support for b-parasite soil moisture sensor ( #1666 )
2021-04-08 13:59:30 +02:00
Stanislav Meduna
808e3be324
Add the display.is_displaying_page condition ( #1646 )
...
* display: add the display.is_displaying_page condition
* use maybe_simple_value for page_id
* add test
2021-04-02 23:00:41 -03:00
Andreas Hergert
9e23987db8
Add I2CMultiplexer in generel and the TCA9548A in special ( #1410 )
...
* Added I2CMultiplexer in generel and the TCA9548A in special
* cleanup
* tidy
* tidy
* tidy
* tidy
* Update CODEOWNERS
* Update CODEOWNERS
* added CODEOWNERS
* Fix CODEOWNERS
* protected function
* fixed scan
* fixed style
* added to test1.yaml
* Update esphome/components/tca9548a/__init__.py
* Update esphome/components/i2c/__init__.py
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/i2c/i2c.cpp
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Update esphome/components/i2c/__init__.py
* Update esphome/components/i2c/__init__.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Update esphome/components/i2c/i2c.cpp
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* added define statements for I2C Multiplexer
* fix
* try to tidy
* bug fix
* tidy
* override fix
* only change channel if different
* tidy
* added test
* testfix
* added defines
* tidy
* fix dep
* like recommended
Co-authored-by: Andreas Hergert <andreas.hergert@otrs.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-29 16:50:30 -03:00
Jesse Hills
4d340dc029
Merge branch 'dev' into bump-1.17.0b1
2021-03-22 20:08:57 +13:00
Jesse Hills
af3273d930
Add trigger for http actions to receive the status code ( #1599 )
2021-03-22 16:26:10 +13:00
Niccolò Maggioni
8f1eb77e05
Background calibration & ABC commands for SenseAir S8 ( #1623 )
2021-03-22 12:59:41 +13:00
matikij
91898cb814
Add 2.13in-ttgo-b1 waveshare epaper module. ( #1326 )
2021-03-20 20:32:46 +13:00
Steve Baxter
a77784a6da
Implement pulse_meter as an improvement on pulse_counter and pulse_width for meters ( #1434 )
2021-03-19 21:16:27 +13:00
Mike Ryan
f63f9168ff
Add addressable_light display platform ( #1272 )
2021-03-18 19:08:50 +13:00
Sergey V. DUDANOV
f34c9b33fc
Midea climate support ( #1328 )
...
* Added support for Midea IoT climate devices via UART interface (USB-dongle)
* Fixed lint checks
* Fixed lint checks
* CODEOWNERS update
* Clang-format
* Clang-format
* Add network device notification message support (show WiFi sign on devices)
* Make wifi_signal_sensor optional component
* Some optimization
* Optimizations and code formatting
* Fixed lint checks
* Fixed lint checks
* Fixed sign error
* Code changes
* Network notify repeat every 10 min
* Added log messages
* Fixed lint checks
* Refactoring: MideaClimate => MideaAC
* Using enums instead literals in Midea states
* Enum changed to be more correct
* Shrink notify frame to 32 bytes
* Fixed lint checks
* Change notify frame appliance type to common broadcast
* Control optimization
* Fixed control error
* Control command now don't reset others uncontrollable properties of device
* Fixed lint checks
* Some optimization
* on_receive callback give const Frame
* Fix control
* Fixes
* Some minor changes
* Fixed lint error
* No dependency from wifi_signal sensor for stretched WiFi icon. New option: stretched_icon instead wifi_signal_id.
* Fix option name
* Added export of outdoor temperature as sensor value
* Fixed lint errors
* Fixed pylint error
* Minor fix
* Fix temperature overflow in some cases
* Added answer on QueryNetwork command from appliance. Now don't wait for ack on 0x0D command.
* Fix lint error
* Added humidity setpoint optional sensor
* Added boolean options 'swing_horizontal' and 'swing_both'
* Added debug frame output
* Added debug frame output
* Fix lints error
* Some debug output optimization
* Fix lint check
* Some code optimization: adding templates
* Fix lint error
* Added sensors device classes
* Python code reformatted with black formatter
* RX frame debug message
RX frame debug message now prints before checking
* Remove CRC check for receiving frames
* Added experimental power usage option
* Added power usage option
* Fixed lint errors
* Major changes. See esp-docs.
* Added tests in test4.yaml
* Added tests in test1.yaml
* Added wifi dependency
* Fix test1.yaml
* Some fix :)
* One more refactoring
* One more refactoring
* One more refactoring
2021-03-17 17:27:50 -03:00
Jesse Hills
faf577a9dd
Add option to suffix name with mac address ( #1615 )
...
* Add option to suffix name with mac address
* Rename and add to test file
2021-03-17 17:22:48 -03:00
Jim Ekman
7708b81ef5
Support fan speed levels ( #1541 )
...
* Add fan speed percentage support to the API
* Add float fan speed percentage
* Add percentage support to automation and configuration
* Update Tuya fan
* Fix pylint warning
* Update API to use speed levels instead of percentage
* Use speed levels
* Fix type warnings
* MQTT component now converts between speed levels and enums
* Webserver now supports speed_level
* Update prometheus
* Remove low/medium/high settings from speed fan
* Remove unused enum
* Configurable speed levels for speed fan
* Remove unused import
* Rename speed_level->speed and speed_levels->speed_count
* Rename supported_speed_levels -> supported_speed_count in API and FanTraits
Field id stays the same in the protocol, so the change is not breaking for aioesphome.
2021-03-17 10:40:02 -03:00
Massimiliano Ravelli
28a72fa56b
Fixed component_tests config ( #1608 )
2021-03-12 19:58:43 -03:00
Guillermo Ruffino
1e227e8051
Schema dump ( #1564 )
...
* schema dump idea
accept boolean or anything default
accept null also for full dicts
added some common validators
more simple validators
support multi_conf
better handle automations
updates
updates
handle lists
removed not needed class
move to own folder
generalized for automations lists, etc
updates
updates
clean up
clean up
fix automations
made comment optional
basic docs support
added more docs
fixes docs handling
updates
updates
fix components parent
updates
updates
updates
Fix inkplate 6 registration
updates
Disable logging for vscode add on
better handle buses
keep extended order as in CONFIGs
updates
updates
updates
disable comments
moved to scripts/build_jsonschema
added configurable decorators
path handling
fix handle list_schema
fixes and cleanup
add jschema_extractor to maybe
updates
lint
no schema in git
add generated loggers list
* lint
2021-03-07 21:05:08 -03:00
Guillermo Ruffino
d5cf4b7eac
Improve error checking: too many component id candidates ( #1570 )
...
* add error too many candidates
* Improve error checking of ids
2021-03-07 19:59:32 -03:00
Jesse Hills
570ec36fe3
MCP23XXX Refactor ( #1560 )
...
* Refactor MCP23XXX classes to consolidate shared code
* Update test mcp23xxx pin schemas
2021-03-07 16:23:54 -03:00
Guillermo Ruffino
69879920eb
add-black ( #1593 )
...
* Add black
Update pre commit
Update pre commit
add empty line
* Format with black
2021-03-07 16:03:16 -03:00
needspeed
0f151a8f6b
Extend 'uart:' with 'invert:' for esp32 ( #1586 )
2021-03-06 10:25:07 -03:00
Gabe Cook
88b46b7487
Add min/max filters ( #1569 )
2021-03-05 10:10:06 -03:00
Moritz Glöckl
8e93735861
Add support for the SM300D2 7-in-1 sensor module ( #1524 )
...
* Added support for SM300D2 sensor module
* Fixed lint errors due to added tvoc config
* add device class
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-03-02 21:54:52 -03:00
SenexCrenshaw
ac25b138f5
Migrate ESPColor to Color ( #1551 )
...
* Migrate ESPColor to Color
* color.h constructor fix
* Updated componets to use Color
Added a using for ESPColor
* Lint fixes
* Fixed value error
* Update display components to use colorutil
* Updated to latest PR comments
* Fixed COLOR_WHITE
* Moved esp_scale to color_utils
* Rename color_utils to display_color_utils
2021-03-02 11:08:57 -03:00
Seppel Hardt
bdf004867d
Added samsung36 ir protocol ( #1438 )
...
* Added samsung36 ir protocol
* Make linter happy
* Added test and fixed python failure
* Sorry for the commits but linter was still not happy :)
* Okay have to run script/clang-format -i
Co-authored-by: tuxBurner <tuxBurner@boggo.de>
2021-02-27 20:16:27 -03:00
Gabe Cook
08ecca86bc
Add send_every to uart switch for recurring data ( #1514 )
2021-02-27 19:53:53 -03:00
Kurt Kellner
b91723344e
Vl53l0x change address ( #1126 )
...
* Added vl53l0x change address and timeout
* Added vl53l0x change address and timeout
* vl53l0x code cleanup and update test
* remove executable bit
* lint code cleanup
* code review fixes including timeout default to 10ms
* Code review cleanup and change a WARN log level message to DEBUG
* Fix issue where warn should be temporary
* Added name of sensor to warning message
* Fix blacklist lint issue
* Remove unused import
2021-02-25 19:12:06 -03:00
spilin
3d0310d0e0
Add dial support for sim800l component ( #1558 )
2021-02-25 18:11:15 -03:00
Kris
a925036ff8
Added Waveshare 2.90inch V2 e-ink display ( #1538 )
2021-02-20 19:29:52 +13:00
Guillermo Ruffino
25924ca4e8
fix substitution losing track of document range ( #1547 )
2021-02-19 21:52:42 -03:00
Kris
c92c439d17
Added Waveshare 2.90inch V2 e-ink display ( #1538 )
2021-02-18 07:12:02 +13:00
Chris Nussbaum
dce20680d7
Add duration option to action start deep sleep ( #1526 )
2021-02-15 14:32:22 -03:00
marecabo
f95be6a0df
Device class attribute for sensor component ( #1525 )
...
* Add constants for sensor device_class
* Add device_class attribute to sensor component
* Add device_class attribute to sensor class
* Add device_class to mhz19 temperature sensor
* Add device_class to sensor in api component
* Add test for device_class of sensor
* Rename DEVICE_CLASS_NONE to DEVICE_CLASS_EMPTY for consistency
* Make optional attributes of sensor component truly optional
2021-02-15 12:49:02 -03:00
SenexCrenshaw
a342302114
st7735_conf_fixes ( #1530 )
2021-02-14 02:21:43 -03:00
Keith Burzinski
65c7e27a43
MCP230xx open drain interrupt pins ( #1243 )
2021-02-14 10:01:21 +13:00
Frank Bakker
57b56010da
Added energy sensor to hlw8012 ( #1198 )
2021-02-14 10:01:21 +13:00
Keith Burzinski
b52f7cfe86
MCP230xx open drain interrupt pins ( #1243 )
2021-02-13 22:07:11 +13:00
Frank Bakker
81b512a7b3
Added energy sensor to hlw8012 ( #1198 )
2021-02-13 21:57:06 +13:00
Jérémy JOURDIN
04d8593f38
Add MCP4725 DAC Component ( #1418 )
...
* Add MCP4725 DAC
* Fix lint
* Fix lint
* Fix lint
* Lint & cleanup
* Lint again
* One more lint
* add test
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-02-06 12:18:48 -03:00
fkirill
de3377132d
Adding support for the Inkbird IBS-TH1 Mini sensor ( #1099 )
2021-02-06 17:04:47 +13:00
Florian Mösch
e2ad6fe3d8
rename read/write to read/time/write_time ( #1468 )
2021-01-26 13:39:42 +13:00
Florian Mösch
6781d08c9b
time sync notification ( #1442 )
...
* add on_time_sync trigger
* cleanup lint
* fix review remark (sntp didn't trigger callbacks)
2021-01-26 13:39:42 +13:00
Guillermo Ruffino
52c67d715b
add http request tests ( #1448 )
...
* add http request tests
* add to test3 for esp8266
* move test action to another trigger
2021-01-23 19:44:20 -03:00
Florian Mösch
b28735d63b
rename read/write to read/time/write_time ( #1468 )
2021-01-18 09:35:35 -03:00
Florian Mösch
4c105398f7
time sync notification ( #1442 )
...
* add on_time_sync trigger
* cleanup lint
* fix review remark (sntp didn't trigger callbacks)
2021-01-18 09:34:50 -03:00
SenexCrenshaw
28f2582256
Updated Mcp3008 to support reference_voltage and voltage_sampler::VoltageSampler ( #1387 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-17 17:06:37 +13:00
Florian Mösch
652f6058d1
make time components polling components ( #1443 )
...
* make real time clock components polling components
* add test
2021-01-17 17:06:37 +13:00
Guillermo Ruffino
717aab7c8b
Add rc522 i2c ( #1432 )
...
* split to spi and i2c
* fix binary_sensor
* i2c comms ready
* fix rc522_spi binary sensor compat
* lint
* lint
* add test and codeowners
* fix refactor
2021-01-17 17:06:37 +13:00
SenexCrenshaw
36089a1400
Updated Mcp3008 to support reference_voltage and voltage_sampler::VoltageSampler ( #1387 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-01-14 07:33:19 +13:00
Florian Mösch
bf453ad8cd
make time components polling components ( #1443 )
...
* make real time clock components polling components
* add test
2021-01-12 15:37:22 -03:00
Guillermo Ruffino
fbc1b3e316
Add rc522 i2c ( #1432 )
...
* split to spi and i2c
* fix binary_sensor
* i2c comms ready
* fix rc522_spi binary sensor compat
* lint
* lint
* add test and codeowners
* fix refactor
2021-01-12 10:13:53 -03:00
Florian Mösch
dcd3d2084d
DS1307 real time clock component ( #1441 )
...
* initial support for DS1307 real time clock
* add simple test, make sync functions public
* cleanup lint
* add sync to/from rtc actions
* changes action names
* Update esphome/components/ds1307/ds1307.cpp
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Update esphome/components/ds1307/time.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* fix suggested change
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-01-11 20:10:35 +13:00
Florian Mösch
699696e8d1
DS1307 real time clock component ( #1441 )
...
* initial support for DS1307 real time clock
* add simple test, make sync functions public
* cleanup lint
* add sync to/from rtc actions
* changes action names
* Update esphome/components/ds1307/ds1307.cpp
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* Update esphome/components/ds1307/time.py
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* fix suggested change
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
2021-01-08 19:40:22 -03:00
Keith Burzinski
095d3181cd
SSD1322 display support ( #1405 )
2020-12-30 22:52:41 +13:00
Keith Burzinski
9aa14a2e83
Add full SSD1327 display support ( #1406 )
2020-12-30 22:48:23 +13:00
Daniel Schramm
498b59e998
Canbus + MCP2515 including ExtID support ( #1384 )
2020-12-22 08:27:20 +13:00
SenexCrenshaw
7cd4c3bdd3
MCP23SXX I/O Expander - SPI ( #1068 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2020-12-07 06:43:55 +13:00
Michel Marti
b3169deda7
scd30: Allow setting temperature offset ( #1400 )
2020-12-04 07:21:10 +13:00
Alex
3afb564a48
Configurable OTA Safe Mode ( #1393 )
2020-12-02 11:41:39 +13:00
SenexCrenshaw
7ff3f752e2
New display ST7735 ( #1066 )
...
* Initial Commit - ST7735
* Updated for CI checks
* Updated for travis build
* Travis fixes
* Travis line too long
* Travis fixes
* Fixed up travis format issues
* Travis Fixes
* Initial Commit - ST7735
* Updated for CI checks
* Updated for travis build
* Travis fixes
* Travis line too long
* Travis fixes
* Fixed up travis format issues
* Travis Fixes
* Update to new color API and added test
* Check fixes
* Fixed sid length in test
* Cleaned up whitespaces
* kbx81 recommended fixes
* test fix
* Fixes of fixes
* Fixed test1.yaml
* Fixed test1.yaml
* Changed digital pin #s to gpio
* Updated to match kbx's color names
* Typo for ST7735_INITR_MINI_160X80
* Updated 8bit color space code
Added to_rgb_332 to color.h
fixed typo
* Added in to_rgb_332,to_bgr_332, rgb_332to_rgb_556 and a more generic scale
* Fixed MADCTL
* Fixp MADCTL
* Implemented usrbgr option
updated color to support 332 bgr conversion
typo fix
* Updated to_bgr_332
* Fix up for clang
* FIx up init code. type in buffer caused overrun
* fixup protected names
* typos
* Matched use_bgr to its conf
* color.h red fix in bgr_233to_rgb_565
* Fix ST7735_INITR_MINI_160X80
* Renamed bgr_233to_bgr_565 to match its function
Color space leak in bgr_233to_bgr_565.
cleaned up init code for displays.
* Fix
* clang fix
* Started Color Conversion
* Added various bit color functions
add triadto
* lint changes
* Various fixes
* Various formatting fixes. Wish my checks worked!
* Updated color api to support different formats
removed to_rgb_565
* lint clang fixes
* Test1 fix
* test1.yaml fix
* fixed 565 in ILI9341Display
* Added CodeOwners
* Updated CODEOWNERS
* changed to to332 and to565
* Waiting for color.h changes
* Stage changes
* Removed all changes except this driver
* Moved color functions into driver
* lint changes
* Lint and removed unrelated display driver changes
* Lint changes
* Initial Commit - ST7735
* Updated for CI checks
* Updated for travis build
* Travis fixes
* Travis line too long
* Travis fixes
* Fixed up travis format issues
* Travis Fixes
* Initial Commit - ST7735
* Updated for CI checks
* Updated for travis build
* Travis fixes
* Travis line too long
* Travis fixes
* Fixed up travis format issues
* Travis Fixes
* Update to new color API and added test
* Check fixes
* Fixed sid length in test
* Cleaned up whitespaces
* kbx81 recommended fixes
* test fix
* Fixes of fixes
* Fixed test1.yaml
* Fixed test1.yaml
* Changed digital pin #s to gpio
* Updated to match kbx's color names
* Typo for ST7735_INITR_MINI_160X80
* Updated 8bit color space code
Added to_rgb_332 to color.h
fixed typo
* Added in to_rgb_332,to_bgr_332, rgb_332to_rgb_556 and a more generic scale
* Fixed MADCTL
* Fixp MADCTL
* Implemented usrbgr option
updated color to support 332 bgr conversion
typo fix
* Updated to_bgr_332
* Fix up for clang
* FIx up init code. type in buffer caused overrun
* fixup protected names
* typos
* Matched use_bgr to its conf
* color.h red fix in bgr_233to_rgb_565
* Fix ST7735_INITR_MINI_160X80
* Renamed bgr_233to_bgr_565 to match its function
Color space leak in bgr_233to_bgr_565.
cleaned up init code for displays.
* Fix
* clang fix
* Started Color Conversion
* Added various bit color functions
add triadto
* lint changes
* Various fixes
* Various formatting fixes. Wish my checks worked!
* Updated color api to support different formats
removed to_rgb_565
* lint clang fixes
* Test1 fix
* test1.yaml fix
* fixed 565 in ILI9341Display
* Added CodeOwners
* Updated CODEOWNERS
* changed to to332 and to565
* Waiting for color.h changes
* Stage changes
* Removed all changes except this driver
* Moved color functions into driver
* lint changes
* Lint and removed unrelated display driver changes
* Lint changes
* Updated with latest color api
* pulled from origin
* Updated for color.h changes
* pulled test1 from dev
* Added test
2020-11-23 14:37:43 -03:00
SenexCrenshaw
d821ead92a
Formatted test yaml files ( #1382 )
2020-11-19 23:59:19 -03:00
Keith Burzinski
08f1eac8b2
SSD1331 display support ( #1244 )
2020-11-18 19:34:53 +13:00
MoA
a9a00f139b
Add climate.hitachi_ac344 ( #1336 )
...
* Add climate.hitachi_ac344
* Add Hitachi AC344 Climate IR test
* Fixes unhandled switch-case in fan-mode
* Fixes logging format
* Fixes file mode
* Lint clang-tidy
* Lint clang-tidy
* Static cast float to uint8
git push
* Remove comment and debug code
* Change log verbosity to VV
2020-11-17 22:05:12 -03:00
Samuel Sieb
d20caa9d60
add support for EZO sensor circuits ( #1239 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
2020-11-17 22:01:42 +13:00
Marcos Pérez Ferro
7e40d4246c
Adding ADE7953 irq_pin ( #1359 )
2020-11-16 09:30:14 +13:00
0hax
5a2b14cfa4
components: teleinfo: electrical counter information. ( #1108 )
...
Signed-off-by: 0hax <0hax@protonmail.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2020-11-16 07:08:19 +13:00
Michel Marti
f2d218e5ad
scd30: Allow setting ambient pressure compensation ( #1365 )
2020-11-16 07:03:08 +13:00
Yaroslav
c9055f2aef
Allow Tuya climate temperature_multiplier to be current/target multiplier ( #1345 )
...
* Separate temperature_multiplier to current/target multiplier
* Apply suggestions from code review
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2020-11-12 06:31:35 +13:00
Yaroslav
9fed7cab5f
Add support for Tuya MCU 0x1C (obtain local time) ( #1344 )
...
* Fix some Tuya devices not handling commands sent without delay
* Also do not report WiFi status if MCU does not support it
* Support Tuya MCU 0x1c command (obtain local time)
* Use #ifdef USE_TIME to handle optional dependency on RTC
* Rename Tuya clock config variable to time to be consistent with the codebase
* Add tuya time configuration to test4
2020-11-11 11:31:28 +13:00
Daniel Hyles
fc01a70b65
Hbridge christmas light ( #1251 )
...
* Hbridge Christmas light component
Can be used for Christmas lights that use 2 wires to run 2 different strings of lights using a hbridge driver.
* Add Test
NOTE: I am unable to test this via the docker image
* Update hbridge_light_output.h
* Update hbridge_light_output.h
* Update hbridge_light_output.h
* Update light.py
* Fixed duty as white value bug fixed
* lint changes
* Name case change
* thanks lint
2020-11-08 14:46:34 +13:00
Alexander Pohl
49cb8fd9d3
Add support for ATC_MiThermometer ( #1291 )
...
* Add support for additional Xiaomi BLE sensors (#1027 )
* Revert "Add support for additional Xiaomi BLE sensors (#1027 )"
This reverts commit b2723830f4https://gitlab.com/pycqa/flake8 ) from 3.8.3 to 3.8.4.
- [Release notes](https://gitlab.com/pycqa/flake8/tags )
- [Commits](https://gitlab.com/pycqa/flake8/compare/3.8.3...3.8.4 )
Signed-off-by: dependabot[bot] <support@github.com>
* Add files via upload
* Bump pytest from 6.0.2 to 6.1.1
Bumps [pytest](https://github.com/pytest-dev/pytest ) from 6.0.2 to 6.1.1.
- [Release notes](https://github.com/pytest-dev/pytest/releases )
- [Changelog](https://github.com/pytest-dev/pytest/blob/master/CHANGELOG.rst )
- [Commits](https://github.com/pytest-dev/pytest/compare/6.0.2...6.1.1 )
Signed-off-by: dependabot[bot] <support@github.com>
* add ATC battery voltage to test2.yaml
* fix lint-python
* Bump colorlog from 4.2.1 to 4.4.0
Bumps [colorlog](https://github.com/borntyping/python-colorlog ) from 4.2.1 to 4.4.0.
- [Release notes](https://github.com/borntyping/python-colorlog/releases )
- [Commits](https://github.com/borntyping/python-colorlog/compare/v4.2.1...v4.4.0 )
Signed-off-by: dependabot[bot] <support@github.com>
* Bump voluptuous from 0.11.7 to 0.12.0
Bumps [voluptuous](https://github.com/alecthomas/voluptuous ) from 0.11.7 to 0.12.0.
- [Release notes](https://github.com/alecthomas/voluptuous/releases )
- [Changelog](https://github.com/alecthomas/voluptuous/blob/master/CHANGELOG.md )
- [Commits](https://github.com/alecthomas/voluptuous/commits/v0.12.0 )
Signed-off-by: dependabot[bot] <support@github.com>
* restore requirements
* move codeowner above dependencies
* Revert "restore requirements"
This reverts commit 3c9fd8b4218eb0dba1c320952632db87bbf95d861b6ed80431
2020-11-04 06:36:11 +13:00
