harbor/docs/user_guide.md
Jesse Hu fb13d4e080 Remove unneccessary certificate options for Helm CLI
The --cert-file and --key-file options for Helm CLI
are used to identify HTTPS client, i.e. the helm CLI.
It's not mandantory and usually not needed. Most of
the users don't know how to get these two files.

Signed-off-by: Jesse Hu <huh@vmware.com>
2019-07-30 13:16:35 +08:00

44 KiB

User Guide

Overview

This guide walks you through the fundamentals of using Harbor. You'll learn how to use Harbor to:

Role Based Access Control(RBAC)

rbac

Harbor manages images through projects. Users can be added into one project as a member with three different roles:

  • Guest: Guest has read-only privilege for a specified project.
  • Developer: Developer has read and write privileges for a project.
  • ProjectAdmin: When creating a new project, you will be assigned the "ProjectAdmin" role to the project. Besides read-write privileges, the "ProjectAdmin" also has some management privileges, such as adding and removing members, starting a vulnerability scan.

Besides the above three roles, there are two system-wide roles:

  • SysAdmin: "SysAdmin" has the most privileges. In addition to the privileges mentioned above, "SysAdmin" can also list all projects, set an ordinary user as administrator, delete users and set vulnerability scan policy for all images. The public project "library" is also owned by the administrator.
  • Anonymous: When a user is not logged in, the user is considered as an "Anonymous" user. An anonymous user has no access to private projects and has read-only access to public projects.

User account

Harbor supports different authentication modes:

  • Database(db_auth)

    Users are stored in the local database.

    A user can register himself/herself in Harbor in this mode. To disable user self-registration, refer to the installation guide for initial configuration, or disable this feature in Administrator Options. When self-registration is disabled, the system administrator can add users into Harbor.

    When registering or adding a new user, the username and email must be unique in the Harbor system. The password must contain at least 8 characters with 1 lowercase letter, 1 uppercase letter and 1 numeric character.

    When you forgot your password, you can follow the below steps to reset the password:

    1. Click the link "Forgot Password" in the sign in page.
    2. Input the email address entered when you signed up, an email will be sent out to you for password reset.
    3. After receiving the email, click on the link in the email which directs you to a password reset web page.
    4. Input your new password and click "Save".
  • LDAP/Active Directory (ldap_auth)

    Under this authentication mode, users whose credentials are stored in an external LDAP or AD server can log in to Harbor directly.

    When an LDAP/AD user logs in by username and password, Harbor binds to the LDAP/AD server with the "LDAP Search DN" and "LDAP Search Password" described in installation guide. If it succeeded, Harbor looks up the user under the LDAP entry "LDAP Base DN" including substree. The attribute (such as uid, cn) specified by "LDAP UID" is used to match a user with the username. If a match is found, the user's password is verified by a bind request to the LDAP/AD server. Uncheck "LDAP Verify Cert" if the LDAP/AD server uses a self-signed or an untrusted certificate.

    Self-registration, deleting user, changing password and resetting password are not supported under LDAP/AD authentication mode because the users are managed by LDAP or AD.

  • OIDC Provider (oidc_auth)

    With this authentication mode, regular user will login to Harbor Portal via SSO flow.
    After the system administrator configure Harbor to authenticate via OIDC (more details refer to this section), a button LOGIN VIA OIDC PROVIDER will appear on the login page.
    oidc_login

    By clicking this button user will kick off the SSO flow and be redirected to the OIDC Provider for authentication. After a successful authentication at the remote site, user will be redirected to Harbor. There will be an "onboard" step if it's the first time the user authenticate using his account, in which there will be a dialog popped up for him to set his user name in Harbor: oidc_onboar

    This user name will be the identifier for this user in Harbor, which will be used in the cases such as adding member to a project, assigning roles, etc. This has to be a unique user name, if another user has used this user name to onboard, user will be prompted to choose another one.

    Regarding this user to use docker CLI, please refer to Using CLI after login via OIDC based SSO

    NOTE:

    1. After the onboard process, you still have to login to Harbor via SSO flow, the Username and Password fields are only for local admin to login when Harbor is configured authentication via OIDC.
    2. Similar to LDAP authentication mode, self-registration, updating profile, deleting user, changing password and resetting password are not supported.

Managing projects

A project in Harbor contains all repositories of an application. No images can be pushed to Harbor before the project is created. RBAC is applied to a project. There are two types of projects in Harbor:

  • Public: All users have the read privilege to a public project, it's convenient for you to share some repositories with others in this way.
  • Private: A private project can only be accessed by users with proper privileges.

You can create a project after you signed in. Check on the "Access Level" checkbox will make this project public.

create project

After the project is created, you can browse repositories, members, logs, replication and configuration using the navigation tab.

browse project

There are two views to show repositories, list view and card view, you can switch between them by clicking the corresponding icon.

browse repositories

All logs can be listed by clicking "Logs". You can apply a filter by username, or operations and dates under "Advanced Search".

browse project

browse project

Project properties can be changed by clicking "Configuration".

  • To make all repositories under the project accessible to everyone, select the Public checkbox.

  • To prevent un-signed images under the project from being pulled, select the Enable content trust checkbox.

  • To prevent vulnerable images under the project from being pulled, select the Prevent vulnerable images from running checkbox and change the severity level of vulnerabilities. Images cannot be pulled if their level equals to or higher than the currently selected level.

  • To activate an immediate vulnerability scan on new images that are pushed to the project, select the Automatically scan images on push checkbox.

browse project

Managing members of a project

Adding members

You can add members with different roles to an existing project. You can add a LDAP/AD user to project members under LDAP/AD authentication mode.

browse project

Updating and removing members

You can check one or more members, then click ACTION, choose one role to batch switch checked members' roles or remove them from the project.

browse project

Replicating resources

Replication allows users to replicate resources(images/charts) between Harbor and non-Harbor registries in both pull or push mode. Currently, the non-Harbor registries includes Docker Hub, Docker registry, Huawei SWR, and more registries will be supported in future.

Once the system administrator has set a rule, all resources that match the defined filter patterns will be replicated to the destination registry when the triggering condition is matched. Each resource will start a task to run. If the namespace does not exist on the destination registry, a new namespace will be created automatically. If it already exists and the user configured in policy has no write privilege to it, the process will fail. The member information will not be replicated.

There may be a bit of delay during replication based on the situation of the network. If replication task fails, it will be re-scheduled a few minutes later and try 3 times.

Note: Due to API changes, replication between different versions of Harbor may be broken.

Creating a replication rule

Login as a system administrator user, click NEW REPLICATION RULE under Administration->Replications and fill in the necessary fields. You can choose different replication modes, resource filters and trigger modes according to the different requirements. If there is no endpoint available in the list, you need to create one. Click SAVE to create a replication rule.

browse project

Resource filter

Three resource filters are supported:

  • Name: Filter resources according to the name.
  • Tag: Filter resources according to the tag.
  • Resource: Filter images according to the resource type.

The terms supported in the pattern used by name filter and tag filter are as follows:

  • *: Matches any sequence of non-separator characters /.
  • **: Matches any sequence of characters, including path separators /.
  • ?: Matches any single non-separator character /.
  • {alt1,...}: Matches a sequence of characters if one of the comma-separated alternatives matches.

Note: library must be added if you want to replicate the official images of Docker Hub. For example, library/hello-world matches the official hello-world images.

Pattern String(Match or not)
library/* library/hello-world(Y)
library/my/hello-world(N)
library/** library/hello-world(Y)
library/my/hello-world(Y)
{library,goharbor}/** library/hello-world(Y)
goharbor/harbor-core(Y)
google/hello-world(N)
1.? 1.0(Y)
1.01(N)

Trigger mode

  • Manual: Replicate the resources manually when needed. Note: The deletion operations are not replicated.
  • Scheduled: Replicate the resources periodically. Note: The deletion operations are not replicated.
  • Event Based: When a new resource is pushed to the project, it is replicated to the remote registry immediately. Same to the deletion operation if the Delete remote resources when locally deleted checkbox is selected.

Starting a replication manually

Select a replication rule and click REPLICATE, the resources which the rule is applied to will be replicated from the source registry to the destination immediately.

browse project

Listing and stopping replication executions

Click a rule, the execution records which belong to this rule will be listed. Each record represents the summary of the once execution of the rule. Click STOP to stop the executions which are in progress.

browse project

Listing tasks

Click the ID of one execution, you can get the execution summary and the task list. Click the log icon can get the detail information for the replication progress.
Note: The count of IN PROGRESS status in the summary includes both Pending and In Progress tasks.

browse project

Deleting the replication rule

Select the replication rule and click DELETE to delete it. Only rules which have no in progress executions can be deleted.

browse project

Retag Images

Images retag helps users to tag images in Harbor, images can be tagged to different repositories and projects, as long as the users have sufficient permissions. For example,

release/app:stg  -->  release/app:prd
develop/app:v1.0 --> release/app:v1.0

To retag an image, users should have read permission (guest role or above) to the source project and write permission (developer role or above) to the target project.

In Harbor portal, select the image you'd like to retag, and click the enabled Retag button to open the retag dialog.

retag image

In the retag dialog, project name, repository name and the new tag should be specified. On click the CONFIRM button, the new tag would be created instantly. You can check the new tag in the corresponding project.

Searching projects and repositories

Entering a keyword in the search field at the top lists all matching projects and repositories. The search result includes both public and private repositories you have access to.

browse project

Managing labels

Harbor provides two kinds of labels to isolate kinds of resources(only images for now):

  • Global Level Label: Managed by system administrators and used to manage the images of the whole system. They can be added to images under any projects.
  • Project Level Label: Managed by project administrators under a project and can only be added to the images of the project.

Managing global level labels

The system administrators can list, create, update and delete the global level labels under Administration->Configuration->Labels:

manage global level labels

Managing project level labels

The project administrators and system administrators can list, create, update and delete the project level labels under Labels tab of the project detail page:

manage project level labels

Adding labels to/remove labels from images

Users who have system administrator, project administrator or project developer role can click the ADD LABELS button to add labels to or remove labels from images. The label list contains both globel level labels(come first) and project level labels:

add labels to images

Filtering images by labels

The images can be filtered by labels:

filter images by labels

Administrator options

Managing user

Administrator can add "Administrator" role to one or more ordinary users by checking checkboxes and clicking SET AS ADMINISTRATOR. To delete users, checked checkboxes and select DELETE. Deleting user is only supported under database authentication mode.

browse project

Managing registry

You can list, add, edit and delete registries under Administration->Registries. Only registries which are not referenced by any rules can be deleted.

browse project

Managing replication

You can list, add, edit and delete rules under Administration->Replications.

browse project

Managing authentication

You can change authentication mode between Database(default) and LDAP before any user is added, when there is at least one user(besides admin) in Harbor, you cannot change the authentication mode.
browse project When using LDAP mode, user's self-registration is disabled. The parameters of LDAP server must be filled in. For more information, refer to User account.
browse project

When using OIDC mode, user will login Harbor via OIDC based SSO. A client has to be registered on the OIDC provider and Harbor's callback URI needs to be associated to that client as a redirectURI. OIDC settings

The settings of this auth mode:

  • OIDC Provider Name: The name of the OIDC Provider.
  • OIDC Provider Endpoint: The URL of the endpoint of the OIDC provider(a.k.a the Authorization Server in OAuth's terminology), which must service the "well-known" URI for its configuration, more details please refer to https://openid.net/specs/openid-connect-discovery-1_0.html#ProviderConfigurationRequest
  • OIDC Client ID: The ID of client configured on OIDC Provider.
  • OIDC Client Secret: The secret for this client.
  • OIDC Scope: The scope values to be used during the authentication. It is the comma separated string, which must contain openid.
    Normally it should also contain profile and email. For getting the refresh token it should also contain offline_access. Please check with the administrator of the OIDC Provider.
  • Verify Certificate: Whether to check the certificate when accessing the OIDC Provider. if you are running the OIDC Provider with self-signed certificate, make sure this value is set to false.

Managing project creation

Use the Project Creation drop-down menu to set which users can create projects. Select Everyone to allow all users to create projects. Select Admin Only to allow only users with the Administrator role to create projects.
browse project

Managing self-registration

You can manage whether a user can sign up for a new account. This option is not available if you use LDAP authentication.
browse project

Managing email settings

You can change Harbor's email settings, the mail server is used to send out responses to users who request to reset their password.
browse project

Managing registry read only

You can change Harbor's registry read only settings, read only mode will allow 'docker pull' while preventing 'docker push' and the deletion of repository and tag. browse project

If it set to true, deleting repository, tag and pushing image will be disabled. browse project

$ docker push 10.117.169.182/demo/ubuntu:14.04  
The push refers to a repository [10.117.169.182/demo/ubuntu]
0271b8eebde3: Preparing 
denied: The system is in read only mode. Any modification is prohibited.  

Managing role by LDAP group

If auth_mode is ldap_auth, you can manage project role by LDAP/AD group. please refer manage role by ldap group guide.

Pulling and pushing images using Docker client

NOTE: Harbor only supports Registry V2 API. You need to use Docker client 1.6.0 or higher.

Harbor supports HTTP by default and Docker client tries to connect to Harbor using HTTPS first, so if you encounter an error as below when you pull or push images, you need to configure insecure registry. Please, read this document in order to understand how to do this.

Error response from daemon: Get https://myregistrydomain.com/v1/users/: dial tcp myregistrydomain.com:443 getsockopt: connection refused.

If this private registry supports only HTTP or HTTPS with an unknown CA certificate, please add
--insecure-registry myregistrydomain.com to the daemon's start up arguments.

In the case of HTTPS, if you have access to the registry's CA certificate, simply place the CA certificate at /etc/docker/certs.d/myregistrydomain.com/ca.crt .

Pulling images

If the project that the image belongs to is private, you should sign in first:

$ docker login 10.117.169.182  

You can now pull the image:

$ docker pull 10.117.169.182/library/ubuntu:14.04  

Note: Replace "10.117.169.182" with the IP address or domain name of your Harbor node. You cannot pull a unsigned image if you enabled content trust.

Pushing images

Before pushing an image, you must create a corresponding project on Harbor web UI.

First, log in from Docker client:

$ docker login 10.117.169.182  

Tag the image:

$ docker tag ubuntu:14.04 10.117.169.182/demo/ubuntu:14.04  

Push the image:

$ docker push 10.117.169.182/demo/ubuntu:14.04  

Note: Replace "10.117.169.182" with the IP address or domain name of your Harbor node.

Add description to repositories

After pushing an image, an Information can be added by project admin to describe this repository.

Go into the repository and select the "Info" tab, and click the "EDIT" button. An textarea will appear and enter description here. Click "SAVE" button to save this information.

edit info

Download the harbor certs

Users can click the "registry certificate" link to download the registry certificate.

browse project

Deleting repositories

Repository deletion runs in two steps.

First, delete a repository in Harbor's UI. This is soft deletion. You can delete the entire repository or just a tag of it. After the soft deletion, the repository is no longer managed in Harbor, however, the files of the repository still remain in Harbor's storage.

browse project browse project

CAUTION: If both tag A and tag B refer to the same image, after deleting tag A, B will also get deleted. if you enabled content trust, you need to use notary command line tool to delete the tag's signature before you delete an image.

Next, delete the actual files of the repository using the garbage collection in Harbor's UI.

Content trust

NOTE: Notary is an optional component, please make sure you have already installed it in your Harbor instance before you go through this section.
If you want to enable content trust to ensure that images are signed, please set two environment variables in the command line before pushing or pulling any image:

export DOCKER_CONTENT_TRUST=1
export DOCKER_CONTENT_TRUST_SERVER=https://10.117.169.182:4443

If you push the image for the first time, You will be asked to enter the root key passphrase. This will be needed every time you push a new image while the DOCKER_CONTENT_TRUST flag is set.
The root key is generated at: /root/.docker/trust/private/root_keys
You will also be asked to enter a new passphrase for the image. This is generated at /root/.docker/trust/private/tuf_keys/[registry name] /[imagepath].
If you are using a self-signed cert, make sure to copy the CA cert into /etc/docker/certs.d/10.117.169.182 and $HOME/.docker/tls/10.117.169.182:4443/. When an image is signed, it is indicated in the Web UI.
Note: Replace "10.117.169.182" with the IP address or domain name of your Harbor node. In order to use content trust, HTTPS must be enabled in Harbor.

When an image is signed, it has a tick shown in UI; otherwise, a cross sign(X) is displayed instead.
browse project

Vulnerability scanning via Clair

CAUTION: Clair is an optional component, please make sure you have already installed it in your Harbor instance before you go through this section.

Static analysis of vulnerabilities is provided through open source project Clair. You can initiate scanning on a particular image, or on all images in Harbor. Additionally, you can also set a policy to scan all the images at a specified time everyday.

Vulnerability metadata

Clair depends on the vulnerability metadata to complete the analysis process. After the first initial installation, Clair will automatically start to update the metadata database from different vulnerability repositories. The updating process may take a while based on the data size and network connection. If the database has not been fully populated, there is a warning message at the footer of the repository datagrid view. browse project

The 'database not fully ready' warning message is also displayed in the 'Vulnerability' tab of 'Configuration' section under 'Administration' for your awareness. browse project

Once the database is ready, an overall database updated timestamp will be shown in the 'Vulnerability' tab of 'Configuration' section under 'Administration'. browse project

Scanning an image

Enter your project, select the repository. For each tag there will be an 'Vulnerability' column to display vulnerability scanning status and related information. You can select the image and click the "SCAN" button to trigger the vulnerability scan process. browse project NOTES: Only the users with 'Project Admin' role have the privilege to launch the analysis process.

The analysis process may have the following status that are indicated in the 'Vulnerability' column:

  • Not Scanned: The tag has never been scanned.
  • Queued: The scanning task is scheduled but not executed yet.
  • Scanning: The scanning process is in progress.
  • Error: The scanning process failed to complete.
  • Complete: The scanning process was successfully completed.

For the 'Not Scanned' and 'Queued' statuses, a text label with status information is shown. For the 'Scanning', a progress bar will be displayed. If an error occurred, you can click on the 'View Log' link to view the related logs. browse project

If the process was successfully completed, a result bar is created. The width of the different colored sections indicates the percentage of features with vulnerabilities for a particular severity level.

  • Red: High level of vulnerabilities
  • Orange: Medium level of vulnerabilities
  • Yellow: Low level of vulnerabilities
  • Grey: Unknown level of vulnerabilities
  • Green: No vulnerabilities browse project

Move the cursor over the bar, a tooltip with summary report will be displayed. Besides showing the total number of features with vulnerabilities and the total number of features in the scanned image tag, the report also lists the counts of features with vulnerabilities of different severity levels. The completion time of the last analysis process is shown at the bottom of the tooltip. browse project

Click on the tag name link, the detail page will be opened. Besides the information about the tag, all the vulnerabilities found in the last analysis process will be listed with the related information. You can order or filter the list by columns. browse project

NOTES: You can initiate the vulnerability analysis for a tag at anytime you want as long as the status is not 'Queued' or 'Scanning'.

Scanning all images

In the 'Vulnerability' tab of 'Configuration' section under 'Administration', click on the 'SCAN NOW' button to start the analysis process for all the existing images.

NOTES: The scanning process is executed via multiple concurrent asynchronous tasks. There is no guarantee on the order of scanning or the returned results. browse project

To avoid frequently triggering the resource intensive scanning process, the availability of the button is restricted. It can be only triggered once in a predefined period. The next available time will be displayed besides the button. browse project

Scheduled Scan by Policy

You can set policies to control the vulnerability analysis process. Currently, two options are available:

  • None: No policy is selected.
  • Daily: Policy is activated daily. It means an analysis job is scheduled to be executed at the specified time everyday. The scheduled job will scan all the images in Harbor. browse project

NOTES: Once the scheduled job is executed, the completion time of scanning all images will be updated accordingly. Please be aware that the completion time of the images may be different because the execution of analysis for each image may be carried out at different time.

Pull image from Harbor in Kubernetes

Kubernetes users can easily deploy pods with images stored in Harbor. The settings are similar to that of another private registry. There are two major issues:

  1. When your Harbor instance is hosting http and the certificate is self signed. You need to modify daemon.json on each work node of your cluster, for details please refer to: https://docs.docker.com/registry/insecure/#deploy-a-plain-http-registry
  2. If your pod references an image under private project, you need to create a secret with the credentials of user who has permission to pull image from this project, for details refer to: https://kubernetes.io/docs/tasks/configure-pod-container/pull-image-private-registry/

Manage Helm Charts

Helm is a package manager for Kubernetes. Helm uses a packaging format called charts. Since version 1.6.0 Harbor is now a composite cloud-native registry which supports both container image management and Helm charts management. Access to Helm charts in Harbor is controlled by role-based access controls (RBAC) and is restricted by projects.

Manage Helm Charts via portal

List charts

Click your project to enter the project detail page after successful logging in. The existing helm charts will be listed under the tab Helm Charts which is beside the image Repositories tab with the following information:

  • Name of helm chart
  • The status of the chart: Active or Deprecated
  • The count of chart versions
  • The created time of the chart

list charts

You can click the icon buttons on the top right to switch views between card view and list view.

Upload new chart

Click the UPLOAD button on the top left to open the chart uploading dialog. Choose the uploading chart from your filesystem. Click the UPLOAD button to upload it to the chart repository server.

upload charts

If the chart is signed, you can choose the corresponding provenance file from your filesystem and Click the UPLOAD button to upload them together at once.

If the chart is successfully uploaded, it will be displayed in the chart list at once.

List chart versions

Clicking the chart name from the chart list will show all the available versions of that chart with the following information:

  • the chart version number
  • the maintainers of the chart version
  • the template engine used (default is gotpl)
  • the created timestamp of the chart version

list charts versions

Obviously, there will be at least 1 version for each of the charts in the top chart list. Same with chart list view, you can also click the icon buttons on the top right to switch views between card view and list view.

Check the checkbox at the 1st column to select the specified chart versions:

  • Click the DELETE button to delete all the selected chart versions from the chart repository server. Batch operation is supported.
  • Click the DOWNLOAD button to download the chart artifact file. Batch operation is not supported.
  • Click the UPLOAD button to upload the new chart version for the current chart

Adding labels to/remove labels from chart versions

Users who have system administrator, project administrator or project developer role can click the ADD LABELS button to add labels to or remove labels from chart versions.

add labels to chart versions

Filtering chart versions by labels

The chart versions can be filtered by labels:

filter chart versions by labels

View chart version details

Clicking the chart version number link will open the chart version details view. You can see more details about the specified chart version here. There are three content sections:

  • Summary:
    • readme of the chart
    • overall metadata like home, created timestamp and application version
    • related helm commands for reference, such as helm add repo and helm install etc. chart details
  • Dependencies:
    • list all the dependant sun charts with 'name', 'version' and 'repository' fields chart dependencies
  • Values:
    • display the content from values.yaml file with highlight code preview
    • clicking the icon buttons on the top right to switch the yaml file view to k-v value pair list view chart values

Clicking the DOWNLOAD button on the top right will start the downloading process.

Working with Helm CLI

As a helm chart repository, Harbor can work smoothly with Helm CLI. About how to install Helm CLI, please refer install helm. Run command helm version to make sure the version of Helm CLI is v2.9.1+.

helm version

#Client: &version.Version{SemVer:"v2.9.1", GitCommit:"20adb27c7c5868466912eebdf6664e7390ebe710", GitTreeState:"clean"}
#Server: &version.Version{SemVer:"v2.9.1", GitCommit:"20adb27c7c5868466912eebdf6664e7390ebe710", GitTreeState:"clean"}

Add harbor to the repository list

Before working, Harbor should be added into the repository list with helm repo add command. Two different modes are supported.

  • Add Harbor as a unified single index entry point

With this mode Helm can be made aware of all the charts located in different projects and which are accessible by the currently authenticated user.

helm repo add --ca-file ca.crt --username=admin --password=Passw0rd myrepo https://xx.xx.xx.xx/chartrepo

NOTES: Providing both ca file and cert files is caused by an issue from helm.

  • Add Harbor project as separate index entry point

With this mode, helm can only pull charts in the specified project.

helm repo add --ca-file ca.crt --username=admin --password=Passw0rd myrepo https://xx.xx.xx.xx/chartrepo/myproject

Push charts to the repository server by CLI

As an alternative, you can also upload charts via the CLI. It is not supported by the native helm CLI. A plugin from the community should be installed before pushing. Run helm plugin install to install the push plugin first.

helm plugin install https://github.com/chartmuseum/helm-push

After a successful installation, run push command to upload your charts:

helm push --ca-file=ca.crt --username=admin --password=passw0rd chart_repo/hello-helm-0.1.0.tgz myrepo

NOTES: push command does not support pushing a prov file of a signed chart yet.

Install charts

Before installing, make sure your helm is correctly initialized with command helm init and the chart index is synchronized with command helm repo update.

Search the chart with the keyword if you're not sure where it is:

helm search hello

#NAME                            CHART VERSION   APP VERSION     DESCRIPTION                
#local/hello-helm                0.3.10          1.3             A Helm chart for Kubernetes
#myrepo/chart_repo/hello-helm    0.1.10          1.2             A Helm chart for Kubernetes
#myrepo/library/hello-helm       0.3.10          1.3             A Helm chart for Kubernetes

Everything is ready, install the chart to your kubernetes:

helm install --ca-file=ca.crt --username=admin --password=Passw0rd --version 0.1.10 repo248/chart_repo/hello-helm

For other more helm commands like how to sign a chart, please refer to the helm doc.

Online Garbage Collection

Online Garbage Collection enables user to trigger docker registry garbage collection by clicking button on UI.

NOTES: The space is not freed when the images are deleted from Harbor, Garbage Collection is the task to free up the space by removing blobs from the filesystem when they are no longer referenced by a manifest.

For more information about Garbage Collection, please see Garbage Collection.

Setting up Garbage Collection

If you are a system admin, you can trigger garbage collection by clicking "GC Now" in the 'Garbage Collection' tab of 'Configuration' section under 'Administration'.

browse project NOTES: Harbor is put into read-only mode when to execute Garbage Collection, and any modification on docker registry is prohibited.

To avoid frequently triggering the garbage collection process, the availability of the button is restricted. It can be only triggered once in one minute. browse project

Scheduled Garbage Collection by Policy

  • None: No policy is selected.
  • Daily: Policy is activated daily. It means an analysis job is scheduled to be executed at the specified time everyday. The scheduled job will do garbage collection in Harbor.
  • Weekly: Policy is activated weekly. It means an analysis job is scheduled to be executed at the specified time every week. The scheduled job will do garbage collection in Harbor. Once the policy has been configured, you have the option to save the schedule. browse project

Garbage Collection history

If you are a system admin, you can view the latest 10 records of garbage collection execution. browse project

You can click on the 'details' link to view the related logs. browse project

Build history

Build history make it easy to see the contents of a container image, find the code which bulids an image, or locate the image for a source repository.

In Harbor portal, enter your project, select the repository, click on the link of tag name you'd like to see its build history, the detail page will be opened. Then switch to Build History tab, you can see the build history information.

build_ history

Using OIDC CLI secret

Having authenticated via OIDC SSO and onboarded to Harbor, you can use Docker/Helm CLI to access Harbor to read/write the artifacts. As the CLI cannot handle redirection for SSO, we introduced CLI secret, which is only available when Harbor's authentication mode is configured to OIDC based.
After logging into Harbor, click the drop down list to view user's profile: user_profile

You can copy your CLI secret via the dialog of profile: profile_dlg

After that you can authenticate using your user name in Harbor that you set during onboard process, and CLI secret as the password with Docker/Helm CLI, for example:

docker login -u testuser -p xxxxxx jt-test.local.goharbor.io

When you click the "..." icon in the profile dialog, a button for generating new CLI secret will appear, and you can generate a new CLI secret by clicking this button. Please be reminded one user can only have one CLI secret, so when a new secret is generated, the old one becomes invalid at once.

NOTE: Under the hood the CLI secret is associated with the ID token, and Harbor will try to refresh the token, so the CLI secret will be valid after th ID token expires. However, if the OIDC Provider does not provide refresh token or the refresh fails for some reason, the CLI secret will become invalid. In that case you can logout and login Harbor via SSO flow again so Harbor can get a new ID token and the CLI secret will work again.

Robot Account

Robot Accounts are accounts created by project admins that are intended for automated operations. They have the following limitations:

1, Robot Accounts cannot login Harbor portal 2, Robot Accounts can only perform docker push/docker pull operations with a token.

Add a Robot Account

If you are a project admin, you can create a Robot Account by clicking "New Robot Account" in the Robot Accounts tab of a project, and enter a name, a description and permission. add_robot_account

add_robot_account

NOTE: The name will become robot$<accountname> and will be used to distinguish a robot account from a normal harbor user.

copy_robot_account_token As Harbor doesn't store your account token, please make sure to copy it in the pop up dialog after creating, otherwise, there is no way to get it from Harbor.

Configure duration of robot account

If you are a system admin, you can configure the robot account token duration in days. set_robot_account_token_duration

Authenticate with a robot account

To authenticate with a Robot Account, use docker login as below,

docker login harbor.io
Username: robot$accountname
Password: Thepasswordgeneratedbyprojectadmin

Disable a robot account

If you are a project admin, you can disable a Robot Account by clicking "Disable Account" in the Robot Accounts tab of a project. disable_robot_account

Delete a robot account

If you are a project admin, you can delete a Robot Account by clicking "Delete" in the Robot Accounts tab of a project. delete_robot_account

API Explorer

Harbor integrated swagger UI from 1.8. That means all apis can be invoked through UI. Normally, user have 2 ways to navigate to API Explorer.

  1. User can login harbor, and click the "API EXPLORER" button.All apis will be invoked with current user authorization.
    navigation bar

  2. User can navigate to swagger page by ip address by router "devcenter". For example: https://10.192.111.118/devcenter. After go to the page, need to click "authorize" button to give basic authentication to all apis. All apis will be invoked with the authorized user authorization. authentication