mirror of
https://github.com/Fohdeesha/lab-docu.git
synced 2024-11-25 10:45:10 +01:00
100 lines
4.2 KiB
Markdown
100 lines
4.2 KiB
Markdown
# Hidden Brocade Dev Stuff
|
|
This is a collection of hidden tools, modes, and commands buried inside Brocade FastIron products.
|
|
|
|
## Hidden Commands
|
|
|
|
All Fastiron platforms have hidden CLI commands, with the biggest one being `dm`. The ```dm``` command is available (but hidden) for diagnostic use. Type ```dm``` and hit tab to see available options, like the below for example:
|
|
```
|
|
FCX3(config)#dm
|
|
HEX Number
|
|
802-1w show 802-1w internal information
|
|
aaa-acct-session
|
|
acl_tcam command for tcam manager
|
|
aging-loop Turn off/on system aging loop
|
|
allled Toggle -On/Off All LED
|
|
alt-diag Test only, off/on
|
|
app_vlan_debug App VLAN table (shadow)
|
|
auq-resync Sync Auq for a device
|
|
auq-status show auq status
|
|
badaddr Test only, will reboot
|
|
blink Show gig link changes due to PHY blink
|
|
buffer DMA CPU buffer related
|
|
cancel-flash-timeout set flash timeout to default
|
|
clear_boot_count Clear crash dump
|
|
cpld-reg-dump Dump the CPLD register
|
|
--More--
|
|
```
|
|
There's hundreds of options. These are low level debug commands, so if you don't know what they do you can easily break your switch.
|
|
|
|
**Note:** There's around ~700 commands that are completely hidden, they will not even show up using tab autocomplete like the above `dm` commands do. [Click here](store/FastIron-Hidden.txt) for a full list of these commands. Many of these might delete your config, your licenses, lock the switch up, etc.
|
|
|
|
## Hidden OS Console
|
|
This only works over a serial connection. It will not work over telnet/ssh/etc. Connect to a FastIron device over serial, and once it's fully booted and running, press ```ctrl+y```, let go, then press ```m```. Then hit enter. It should drop you down to the OS console:
|
|
```
|
|
OS>
|
|
```
|
|
|
|
> Note: This is mainly for the PowerPC architecture switches (FCX, ICX6610). The ARM switches (ICX6450, ICX7xxx) still have this hidden console available, but it only has ~5 commands. For a proper low level CLI on ARM switches, use the *Accessing Linux* section.
|
|
|
|
Press the question mark on your keyboard for a list of all available options:
|
|
|
|
```
|
|
OS>
|
|
clear Clear internal table
|
|
console Attach console to a process
|
|
copy Copy file
|
|
daw Set data address watchpoint
|
|
dbg Toggle debug mode
|
|
dq Display memory in 64-bit quad word
|
|
dd Display memory in 32-bit double word
|
|
del Delete flash file
|
|
dir List flash files
|
|
----trimmed----
|
|
```
|
|
You'll note the options are nearly identical to what's available in the bootloader, except while the switch is fully booted and running. There's a couple extra options here too that aren't available in just the bootloader. To exit this mode, just hit ```ctrl+z```.
|
|
|
|
## Hidden Bootloader Modes
|
|
|
|
All the newer switches that run linux (ICX6450, ICX6650, ICX7xxx) use u-boot as the bootloader. However it runs in a very locked down mode with only a few commands available. Thankfully after contacting Arris (who own Ruckus, who now owns Brocade), they published their u-boot [source code](https://sourceforge.net/arris/wiki/Projects/).
|
|
|
|
From analyzing their u-boot source, we are able to find some hidden routines that will force the switch to boot into fully unlocked u-boot. To do so, run the following in the bootloader:
|
|
|
|
#### ICX6430 & ICX6450
|
|
```
|
|
manufacturing_diag enable
|
|
reset
|
|
## it will reboot into fully unlocked u-boot
|
|
## be sure to stop it in the bootloader (smash b)
|
|
|
|
## set it back to normal
|
|
manufacturing_diag disable
|
|
reset
|
|
```
|
|
#### ICX6650 & ICX7150 & ICX7250 & ICX7450 & ICX7750
|
|
```
|
|
diagmode enable
|
|
reset
|
|
## it will reboot into fully unlocked u-boot
|
|
## be sure to stop it in the bootloader (smash b)
|
|
|
|
## set it back to normal
|
|
diagmode disable
|
|
reset
|
|
```
|
|
|
|
#### ICX7650 & ICX7850
|
|
```
|
|
setenv diag_mode_on 1
|
|
saveenv
|
|
reset
|
|
## it will reboot into fully unlocked u-boot
|
|
## be sure to stop it in the bootloader (smash b)
|
|
|
|
## set it back to normal
|
|
setenv diag_mode_on
|
|
saveenv
|
|
reset
|
|
```
|
|
|
|
#### ICX7550
|
|
Unknown, but most likely one of the above - just try each one until the command takes. |