Clyde Stubbs
9f6c87c463
Document file: scheme for external component via git ( #3906 )
2024-06-06 07:27:09 +12:00
zry98
783c3f3898
Update tuya climate for active state config changes ( #3855 )
2024-06-05 01:28:38 -07:00
Will Rouesnel
870333337a
Tuya cover invert position report ( #3497 )
2024-06-05 07:58:37 +00:00
svxa
405261e8e1
transmit_aeha carrier frequency now adjustable ( #3859 )
2024-06-05 07:38:44 +00:00
Nate Clark
ebb27d6317
[ethernet] Adds documentation for setting PHY register values ( #3886 )
2024-06-05 18:51:52 +12:00
Jesse Hills
bb6a134f66
Merge branch 'current' into next
2024-06-05 15:51:19 +12:00
John Romkey
80fe66a9aa
Add Seeed Studio XIAO ESP32S3 Sense pins to esp32_camera.rst ( #3446 )
...
* Add Seeed Studio XIAO ESP32S3 Sense pins to esp32_camera.rst
Added camera pin configuration for Seeed Studio XIAO ESP32S3 Sense to Camera page
* Added missing blank line
* Update esp32_camera.rst
---------
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2024-06-04 15:34:45 +02:00
ave
39abfa64e3
Improve SGP30 humidity compensation documentation ( #3556 )
...
* Improve SGP30 compensation documentation
* Use must instead of should, fix celsius spelling
2024-06-04 15:25:34 +02:00
Steffen Arntz
992b09a145
Reorder and reference the mirdea_ir variant example. ( #3767 )
...
This Example has previously not been referenced and had been misplaced at the top of the variants.
2024-06-04 15:19:58 +02:00
John Mueller
21820a7c84
Include note about Daylight Savings Time duplication/skipping ( #3771 )
...
It's probably clear to most people that setting up a trigger for the 31st of every month will fail in February, but apparently triggers between 1am and 3am are also fragile once a year. For non-disruptive or regular triggers, this might not be an issue -- if you want to turn off a device at 2am using on_time, you should know that it will fail once a week. Similarly, if you want to do a daily trigger at 1am, you should know that it will trigger twice a day once a year.
This does not seem super-obvious until you've run into it, so I propose adding a note to the documentation. It also doesn't feel like something that should be changed in the functionality to match cron's behavior, given that it would change the functionality of existing triggers.
I'm not invested in the exact wording / location; I suspect pulling it out a bit into a more visible place makes it less likely for people to miss.
(Brought to you by a trigger that turns off an expensive device at 2am, only for it to run a full day instead :-)).
2024-06-04 15:18:47 +02:00
tronikos
9a3ed01c9b
Fix doc for template cover regarding position_action and has_position ( #3762 )
...
* Update template.rst
* Update template.rst
2024-06-04 15:14:40 +02:00
cypherbits
c998495c7f
doc: wifi reboot_timeout disabled if ap enabled ( #3824 )
...
* doc: wifi reboot_timeout disabled if ap enabled
* Update wifi.rst
* Update wifi.rst
---------
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2024-06-04 15:12:54 +02:00
Ludovic BOUÉ
ef967e9ff7
Update ens160.rst to add missing ens160_air_quality_index ( #3720 )
...
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2024-06-04 15:04:55 +02:00
lps2
54e394d8c0
Update to Addressable Color Wipe Example ( #3903 )
...
Update to the Addressable Color Wipe Example to correctly include gradient as an option of the color rather than the entire effect
2024-06-04 14:44:35 +02:00
João Silva
35eb5c5b0f
Set SN74HC165's clock_inhibit_pin as optional ( #3583 )
...
* Set SN74HC165's clock_inhibit_pin as optional
The use of only 3 pins is mentioned, but the configuration values don't reflect that.
Datasheet specifies the pin can be directly connected to ground. The code already expects the pin to not be used: ec3162282c/esphome/components/sn74hc165/__init__.py (L35)
2024-06-04 13:46:12 +02:00
Clyde Stubbs
a2fbd43080
Document host time ( #3909 )
2024-06-04 15:09:49 +12:00
Pieter Viljoen
bb460cd41d
Add Ethernet MAC address to ethernet_info ( #3887 )
2024-06-04 14:57:07 +12:00
Tobias Marschall
3d475b3d31
Rename last_operation() to get_last_operation() & warn about bug http… ( #3884 )
...
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2024-06-02 22:55:18 +12:00
Jesse Hills
e520d41dc6
Merge branch 'current' into next
2024-06-02 09:18:57 +00:00
Remy van Elst
308aba8011
Update i2s_microphone data value ( #3732 )
...
According to here: 4fcb26d69d/esphome/components/i2s_audio/microphone/i2s_audio_microphone.cpp (L138)
2024-06-02 05:47:25 +00:00
Clyde Stubbs
66e70ecc88
Document host platform ( #3893 )
2024-06-01 15:25:53 +10:00
Simone Rossetto
aa43fcc525
Wireguard support for bk72 ( #3889 )
2024-05-31 21:36:57 -05:00
Eduard Llull
0626032aca
The event type is accesible using the event_type variable. ( #3891 )
...
In the event.on_event automation, the event type that triggered the event is accesible using the event_type variable.
2024-05-31 13:13:15 +02:00
H. Árkosi Róbert
d4ad0730db
ancient version mentions removed + version sensor screenshot update ( #3885 )
2024-05-31 07:33:34 +12:00
Anton Viktorov
7f398b6cb9
Series of Lite-On Light (ALS) and Proximity(PS) sensors - LTR-303, LTR-329, LTR-553, LTR-556, LTR-659, some others ( #3528 )
...
* LTR303 and LTR329 light sensors
* LTR303 tidy up
* LTR303 tidy up
* LTR303 auto mode
* LTR303 auto mode+
* LTR303 auto mode+
* removed param
* LTR als ps
* ref
* typo
* simplified syntax
* minor sections update
* Apply suggestions from code review
* Apply suggestions from code review
---------
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2024-05-30 03:47:02 -05:00
RFDarter
99e76d6689
Webserver entity sorting ( #3741 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2024-05-30 13:54:22 +12:00
Jesse Hills
9e52a9816c
[voice_assistant] Timer triggers ( #3877 )
...
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2024-05-30 13:09:23 +12:00
RFDarter
0138eca827
Change datetime id names in examples ( #3777 )
2024-05-30 10:07:25 +12:00
RFDarter
83c29b6c74
Webserver-mention-v3 ( #3881 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2024-05-30 06:58:30 +12:00
Jesse Hills
60dfe2d5d6
Merge branch 'current' into next
2024-05-28 08:29:08 +12:00
Sašo Domadenik
0cdfa50838
Fix incorrect naming of the AdaFruit MagTag display. ( #3871 )
2024-05-27 07:23:04 +12:00
Honza Pobořil
89d087197f
Fixed attenuation values ( #3868 )
...
According to the docs 12db is not allowed.
https://docs.espressif.com/projects/esp-idf/en/v4.4.7/esp32/api-reference/peripherals/adc.html#_CPPv425adc1_config_channel_atten14adc1_channel_t11adc_atten_t
2024-05-25 15:46:32 +02:00
Jesse Hills
7ebb8a4a87
Merge branch 'current' into next
2024-05-25 08:14:27 +12:00
polyfloyd
187e1d59a9
MPR121 gpio ( #3845 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2024-05-24 09:08:31 +12:00
Pavlo Dudnytskyi
d28cfebad3
Documentation added for button and text_sensor components of Haier integration ( #3851 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Pavlo Dudnytskyi <pdudnytskyi@astrata.eu>
2024-05-24 09:07:46 +12:00
Penny Wood
a59b50e4cc
Allow output open drain ( #3853 )
2024-05-23 09:31:59 +12:00
Keith Burzinski
3f10d4dcd6
Add on_safe_mode trigger to docs ( #3857 )
2024-05-23 07:43:18 +12:00
Jeroen van Oort
8fba0d2604
Document the modbus server feature ( #3332 )
...
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2024-05-22 16:17:34 +12:00
Chris Feenstra
99219c4fcd
Fixed broken text ( #3705 )
2024-05-22 06:11:57 +02:00
Samuel Tardieu
a2357ba9c2
Fix typos in time-based cover documentation ( #3856 )
2024-05-22 06:05:26 +02:00
Keith Burzinski
bcb6b5a844
Safe mode documentation and updates ( #3841 )
2024-05-22 13:08:59 +12:00
bzzzbzzzzz
7fe65f6415
Add note that the PWM and RS485 versions of the A02YYUW are not supported ( #3828 )
...
* Update a02yyuw.rst to emphasize that the PWM and RS485 versions of the sensor are not supported.
* Update a02yyuw.rst
---------
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2024-05-21 18:22:11 +02:00
Clyde Stubbs
a62ec76a1f
[ili9xxx] Document pixel_mode and init_sequence ( #3836 )
2024-05-21 09:18:17 +12:00
Jesse Hills
881594ab83
Merge branch 'current' into next
2024-05-20 17:14:00 +12:00
Andy Barratt
a1910a39be
Update esp32_camera.rst with aspect ratios ( #3549 )
...
* Update esp32_camera.rst with aspect ratios
* Corrected typo
2024-05-18 08:34:32 +02:00
Fabian
a3905e0b70
add touch_timeout config option. ( #3553 )
...
* add `touch_timeout` config option.
* Update lilygo_t5_47.rst
---------
Co-authored-by: Your Name <you@example.com>
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2024-05-17 10:58:59 +02:00
Veli Veromann
8c40a72d5f
Update pca9685.rst ( #3842 )
...
Fix typo, adjust wording to be common ("defaults to" instead of "default")
2024-05-16 19:50:07 +02:00
Anton Viktorov
92b3a2d570
INA228/INA229, INA238/INA239, INA237 power/energy/charge monitor (I2C, SPI) - Documentation ( #3571 )
...
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
2024-05-16 16:50:34 +12:00
Anton Viktorov
fafa4823ef
ENS160 I2C and SPI support ( #3683 )
2024-05-16 15:22:44 +12:00
Mat931
0703bace35
Add ADC multisampling ( #3664 )
...
Co-authored-by: H. Árkosi Róbert <robreg@zsurob.hu>
2024-05-16 14:11:24 +12:00
