* Add LG Climate ir
* Add LG Climate IR
* Add LG Climate IR
* Add LG Climate IR
* Add LG Climate IR
* Add LG Climate IR
* Add LG Climate IR
Co-authored-by: Sangheon Heo <square99@SangHeonui-Macmini.local>
* Fix fan oscillation trait not being used
* Add fan direction support to SpeedFan
* Add fan direction to API
* Add fan direction support to BinaryFan
* Fix CI errors
* Fix python format
* Change some ordering to trigger CI
* Add test for the configuration
A component to support [WLED](https://github.com/Aircoookie/WLED/wiki/UDP-Realtime-Control).
This allows to control addressable LEDs over WiFi/UDP, by pushing data right into LEDs.
The most useful to use [Prismatik](https://github.com/psieg/Lightpack) to create
an immersive effect on PC.
It supports all WLED protocols:
- WARLS
- DRGB
- DRGBW
- DNRGB
- WLED Notifier
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
This adds a `e131` component that allows
to register `e131` addressable light effect.
This uses an internal implementation that
is thread-safe instead of using external libraries.
* Extend `uart:` with `rx_buffer_size:`
This allows to configure `rx_buffer_size:`
to efficiently receive big payloads over UART
* lint
* remove old default value
* add test
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* uart: Add support for specifying the number of bits and parity.
ESP8266SwSerial doesn't really check parity but just read the parity bit
and ignore it when receiving data.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: support begin and end methods.
A component may need to reset uart buffer/status by using begin() and
end() methods. This is useful for example when a component needs to be
sure it is not reading garbage from previously received data over uart.
For end() methods with software serial, disabling interrupt is
currently impossible because of a bug in esp8266 Core:
https://github.com/esp8266/Arduino/issues/6049
Signed-off-by: 0hax <0hax@protonmail.com>
* esphal: add support for detaching an interrupt.
That's needed when a component needs to enable/disable interrupt on a
gpio.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: rename CONF_NR_BITS to CONF_DATA_BITS_NUMBER.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: use static const uint32_t instead of #define.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: use an enum to handle parity.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: split between esp32 and esp8266.
Signed-off-by: 0hax <0hax@protonmail.com>
* uart: check_uart_settings for parity and number of data bits.
Signed-off-by: 0hax <0hax@protonmail.com>
* name param data_bits
* add new params to test
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* wip
* transmitter ready
* climate.whirlpool receiver implemented (#971)
* receiver implemented
* Support for two models of temp ranges
* temperature type and lint
* more lint
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
* add test
* not mess line endings
Co-authored-by: mmanza <40872469+mmanza@users.noreply.github.com>
* Add AC Dimmer support
Fixes https://github.com/esphome/feature-requests/issues/278
* fixes
basically missed the output pin setup and in the switching was switching true true true :P
* Format
* Enable ESP32
* Also setup ZC pin
* Support multiple dimmers sharing ZC pin
* Fix ESP32
* Lint
* off gate on zc detect
* tests pins validation
* Climate Mitsubishi (#725)
* add climate
* Mitsubishi updates
* refactor mitsubishi to use climate_ir
* lint
* fix: only decode when not str already (#923)
Signed-off-by: wilmardo <info@wilmardenouden.nl>
* fix climate-ir bad merge (#935)
* fix climate-ir bad merge
* add mitshubishi test
* http_request: fix memory allocation (#916)
* http_request version fix (#917)
* PID Climate (#885)
* PID Climate
* Add sensor for debugging PID output value
* Add dump_config, use percent
* Add more observable values
* Update
* Set target temperature
* Add autotuner
* Add algorithm explanation
* Add autotuner action, update controller
* Add simulator
* Format
* Change defaults
* Updates
* Use b''.decode() instead of str(b'') (#941)
Handling of request arguments in WizardRequestHandler is not decoding
bytes and rather just doing a str conversion resulting in a value of
"b''" being supplied to the wizard code.
* Adding the espressif 2.6.3 (#944)
* extract and use current version of python 3 (#938)
* Inverted output in neopixelbus (#895)
* Added inverted output
* Added support for inverted output in neopixelbus
* Update esphome/components/neopixelbus/light.py
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Update light.py
* corrected lint errors
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Added degree symbol for MAX7219 7-segment display. (#764)
The ascii char to use it is "~" (0x7E).
Disclaimer: I didn't test this yet.
* Fix dump/tx of 64 bit codes (#940)
* Fix dump/tx of 64 bit codes
* fixed source format
* Update hdc1080.cpp (#887)
* Update hdc1080.cpp
increase waittime, to fix reading errors
* Fix: Update HDC1080.cpp
i fixed the my change on write_bytes
* add tcl112 support for dry, fan and swing (#939)
* Fix SGP30 incorrect baseline reading/writing (#936)
* Split the SGP30 baseline into 2 values
- According to the SGP30 datasheet, each eCO2 and TVOC baseline is a 2-byte value (MSB first)
- The current implementation ignores the MSB of each of the value
- Update the schema to allow 2 different baseline values (optional, but both need to be specified for the baseline to apply)
* Make both eCO2 and TVOC required if the optional baseline is defined
* Make dump_config() looks better
* Add register_*_effect to allow registering custom effects (#947)
This allows to register custom effect from user components,
allowing for bigger composability of source.
* Bugfix/normalize core comparisons (and Python 3 update fixes) (#952)
* Correct implementation of comparisons to be Pythonic
If a comparison cannot be made return NotImplemented, this allows the
Python interpreter to try other comparisons (eg __ieq__) and either
return False (in the case of __eq__) or raise a TypeError
exception (eg in the case of __lt__).
* Python 3 updates
* Add a more helpful message in exception if platform is not defined
* Added a basic pre-commit check
* Add transmit pioneer (#922)
* Added pioneer_protocol to support transmit_pioneer
* Display tm1637 (#946)
* add TM1637 support
* Support a further variant of Xiaomi CGG1 (#930)
* Daikin climate ir component (#964)
* Daikin ARC43XXX IR remote controller support
* Format and lint fixes
* Check temperature values against allowed min/max
* fix tm1637 missing __init__.py (#975)
* Add AC Dimmer support
Fixes https://github.com/esphome/feature-requests/issues/278
* fixes
basically missed the output pin setup and in the switching was switching true true true :P
* Format
* Enable ESP32
* Also setup ZC pin
* Support multiple dimmers sharing ZC pin
* Fix ESP32
* Lint
* off gate on zc detect
* tests pins validation
* fix esp8266 many dimmers, changed timing
* Increased value resolution, added min power
* use min_power from base class
* fix min_power. add init with half cycle
* added method for trailing pulse, trailing and leading
* fix method name. try filter invalid falling pulse
* renamed to ac_dimmer
* fix ESP32 not configuring zero cross twice
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Wilmar den Ouden <wilmardo@users.noreply.github.com>
Co-authored-by: Nikolay Vasilchuk <Anonym.tsk@gmail.com>
Co-authored-by: Tim Savage <tim@savage.company>
Co-authored-by: Vc <37367415+Valcob@users.noreply.github.com>
Co-authored-by: gitolicious <mrjchn@gmail.com>
Co-authored-by: voibit <krestean@gmail.com>
Co-authored-by: Luar Roji <cyberplant@users.noreply.github.com>
Co-authored-by: András Bíró <1202136+andrasbiro@users.noreply.github.com>
Co-authored-by: dmkif <dmkif@users.noreply.github.com>
Co-authored-by: Panuruj Khambanonda (PK) <pk@panurujk.com>
Co-authored-by: Kamil Trzciński <ayufan@ayufan.eu>
Co-authored-by: Keith Burzinski <kbx81x@gmail.com>
Co-authored-by: Mario <4376789+mario-tux@users.noreply.github.com>
Co-authored-by: Héctor Giménez <hector.fwbz@gmail.com>
* Add support for Sensirion SPS30 Particulate Matter sensors
* Remove blocking of the main thread on initialization;
Improve wording on the debug messages;
Add robustness in re-initialization of reconnected or replaced sensors;
* Fix code formatting;
Co-authored-by: Nad <valordk@github>
* Add QMC5883L and Updated HMC5883L
* add tests
* changed to oversampling
* fix pylint
* fix private method
* typo fix
* fix protected method
* Clean up code and PR recomendations
* fix tests
* remote file
* fix qmc oversampling unit
* Remove hmc5883l config logging
Either the units are converted to the user values like 1x, 8x oversampling or not printed at all. Printing the machine-value of these is only confusing users.
* Changes for validate_enum
Move stuff that can be done beforehand out of the bound function, use text_type for py2/3 compatability.
* Remove unused constant
* Remove duplicate tests
* Repeat remove config print
* remove changes to test2 since bin is to large
* Add comment to HMC5583L
Co-authored-by: Timothy Purchas <timothy@TPF.local>
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Added more data to atm90e32 component
* ignore
* correction
* Delete 6chan_energy_meter.yaml
* PR request changes
* repository test branch
* Update setup.py
* Update const.py
* delete test yaml
* fix chip_temperature_sensor
This was throwing an error if chip_temperature was used. It needed to be changed from temp to temperature.
* default
* Update test1.yaml
* Add MAX31865 sensor support, fix MAX31855 sensor.
# MAX31865
Added support for the MAX31865 RTD-to-Digital Converter to measure PT100 and
similar RTDs. Verified with an Adafruit unit (product ID: 3328) and a PT100
probe.
# MAX31855
This was setup for incorrect SPI clock polarity and phase, and would return bad
data due to a race condition measuring on the wrong edge (verified with Saleae
Logic scope). Selecting the correct configuration fixes that problem.
Re-wrote the decode off the datasheet to handle error states better (sends NaN
as an update on failure to read temperature, which shows the value as Unknown
in Home Assistant).
Added the *optional* ability to monitor the internal high-precision temperature
sensor, which can be nice in some applications.
* Tests for MAX31855/MAX38165.
* Update style to match project rules.
Also fix CONF_REFERENCE_RESISTANCE and CONF_REFERENCE_TEMPERATURE being defined
multiple places. Missed this when I added them to const.py.
* Update style to match project rules.
Pylint line limit 101/100 ("missed it by that much").
Also apparently I can't read and patched the wrong line in max31855.cpp.
* Minor string/style cleanup.
There was a copy-paste leftover in max31855.cpp and max31865/sensor.py had
unnecessary whitespace.
* Improve MAX31865 fault detection and logging.
Log levels are more in-line with the documented descriptions.
Fault detection code is improved. A transient fault between reads is still
reported, but now only faults *during* a read cause the sensor to fail and
return NAN ("unknown" in Home Assistant).
* Update style to match project rules.
I just now realized the .clang-format and pylintrc files are included. D'oh!
* MAX31855 & MAX31865 code style alignment.
@OttoWinter caught some style mismatches, updated to match project better.
* Fix a lost '\' in max31865/sensor.py.
* Add support for Sensirion STS3x Temperature sensors
* Removed humidty reading from STS3x sensor
* Fixed line error and operand error
* Fixed syntax
* Add test snippet for STS3x sensor
* Clean up
* #550 Proactive fix for STS3x component reporting WARNING status and reinitialzing similar to SHT3xd
* Flattened config.
* Fixed missing temperature unit
* Code formatting
* Added marking for future commands
* Cleanup
* Removed whitespace
* Cleanup
* Cleanup
* Add support for Sensirion STS3x Temperature sensors
* Removed humidty reading from STS3x sensor
* Fixed line error and operand error
* Fixed syntax
* Add test snippet for STS3x sensor
* Clean up
* Add support for Sensirion SHTC1 and SHTC3 Temperature sensors
* Fixed the test
* Fix lint issues
* Update esphome/components/shtcx/shtcx.cpp
Good point.
Co-Authored-By: Otto Winter <otto@otto-winter.com>
* Refactored device type identification and logging
* Refactoring and cleanup
* Remove sts3x
Co-authored-by: Otto Winter <otto@otto-winter.com>
* Add support for SGP30 eCO2 and TVOC sensors
* Added test for SGP30
* Lint issues fixed
* Lint fixes
* Fixed light lengths
* Cleanup
* Add support for Sensirion SCD30 CO2 sensors
* Fixed few lint issues
* Lint fixes
* Fixed line ending for lint
* Cleanup
* Refactored float conversion
* Refactor unnecessary return
* Refactoring and cleanup
* Updated uptime_sensor_ referencing and simplified checking on availability of copensation
* Temperature and Humidity source moved to a separate compensation block; Dependency for Uptime sensor removed.
* Both humidity_source and temperature_source are now mandatory if the compensation block is defined;
* Clean up
* Cleanup
* Cleanup in search of perfection
* Use correct comment style
Co-authored-by: Otto Winter <otto@otto-winter.com>
* add ssd1325 component
* fix i2c
* remove ssd1325 i2c
* add test
* set max contrast
* No macros - see styleguide
* Remove invalid function
* Formatting
Co-authored-by: Otto Winter <otto@otto-winter.com>
