Keith Burzinski
fc15ddfa91
Add dps310 sensor support ( #3704 )
...
Co-authored-by: Greg Arnold <greg@arnoldassociates.com>
2022-08-19 07:49:35 +12:00
puuu
0688deca6b
Add support for pvvx mithermometer display via ble client ( #3333 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-15 10:56:25 +12:00
Adrián Panella
4d56a975e6
Create feedback cover component ( #3253 )
2022-08-09 17:21:27 +12:00
Ian Blais
ced423748e
Adding support for Whynter ARC-14S/SH Air Conditioners ( #3641 )
2022-08-09 10:49:03 +12:00
Joe
fef39b9fbe
Refactor BedJet climate into Hub component ( #3522 )
2022-08-09 10:14:37 +12:00
Keith Burzinski
522646c64d
Extend ST7789V component to support additional displays ( #3651 )
...
Co-authored-by: definitio <37266727+definitio@users.noreply.github.com>
2022-08-08 07:54:48 +12:00
Jesse Hills
bca96f91b2
Remove min_save_interval from intergration and total_daily_energy ( #3498 )
2022-06-30 16:47:56 +12:00
jimtng
4f57bf786b
Add mqtt.on_connect and mqtt.on_disconnect triggers ( #3520 )
2022-06-03 13:51:50 +12:00
Joe
708672ec7e
[BedJet] Add configurable heating strategy ( #3519 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-31 15:45:01 +12:00
Sergey Dudanov
7092f7663e
midea: New power_toggle action. Auto-use remote transmitter. ( #3496 )
2022-05-23 20:51:45 +12:00
Jesse Hills
40ad9f4911
Add deep_sleep.allow YAML action ( #3459 )
2022-05-11 12:47:50 +12:00
Martin
782186e13d
extend scd4x ( #3409 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 21:25:44 +12:00
George
4e1f6518e8
Delonghi Penguino PAC W120HP ir support ( #3124 )
2022-05-10 21:22:22 +12:00
Ingo Theiss
50a32b387e
Add ENS210 Humidity & Temperature sensor component ( #2942 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-09 17:23:38 +12:00
Joe
6bac551d9f
Add BedJet BLE climate component ( #2452 )
2022-04-14 13:16:13 +12:00
rnauber
70a35656e4
Add support for Shelly Dimmer 2 ( #2954 )
...
Co-authored-by: Niclas Larsson <niclas@edgesystems.se>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Jernej Kos <jernej@kos.mx>
Co-authored-by: Richard Nauber <richard@nauber.dev>
2022-04-14 13:13:51 +12:00
Felix Storm
2e436eae6b
CAN bus: support remote transmission request flag for canbus.send ( #3193 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-04-04 11:15:51 +12:00
Stanislav Meduna
48584e94c4
Allow to set user defined characters on LCD ( #3322 )
2022-03-24 19:37:48 +13:00
andrewpc
99f5ed1461
Add support for QMP6988 Pressure sensor ( #3192 )
2022-03-15 08:09:17 +13:00
wilberforce
3b8ca80900
Webserver v2 ( #2688 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-03-08 15:02:24 +13:00
RubyBailey
c9094ca537
Add sensor support: Honeywell ABP (SPI version) ( #3164 )
...
Co-authored-by: RubyBailey <ruby_bailey11@hotmail.com>
2022-02-22 11:22:30 +01:00
Arturo Casal
d1feaa935d
Add device support: MCP4728 ( #3174 )
...
* Added MCP4728 output component.
* Added tests to test1.yaml
* Added codeowners
* Lint fixes
* Implemented code review changes
* Lint fixes
* Added i2c communication check on setup()
* Fixed tests
* Lint fix
* Update esphome/components/mcp4728/mcp4728_output.cpp
Changed log function
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-21 12:47:03 +01:00
EdJoPaTo
69633826bb
Implement send_first_at for exponential_moving_average ( #3240 )
2022-02-21 13:13:06 +13:00
Fabian Affolter
ba785e29e9
Add support for MPU-6886 ( #3183 )
2022-02-21 12:23:26 +13:00
Otto Winter
f59dbe4a88
Add copy integration ( #3241 )
2022-02-21 09:13:37 +13:00
Otto Winter
5811389891
BH1750 dynamically calculate options ( #3214 )
...
* BH1750 dynamically calculate options
* Fix tests
* Fix NAN
* Convert setup to new-style
* Add myself as codeowner
2022-02-19 15:49:20 +01:00
Tyler Bules
b8d10a62c2
ESP32-C3 deep sleep fix ( #3066 )
2022-02-19 15:13:48 +01:00
Otto Winter
ae57ad0c81
Fix warning in test1.yaml ( #3228 )
2022-02-19 14:42:54 +01:00
Arturo Casal
88fbb0ffbb
Add sensor support: MAX44009 ( #3125 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 09:49:45 +01:00
Borys Pierov
231908fe9f
Implement text_sensor based on ble_client ( #3079 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-19 09:45:32 +01:00
ImSorryButWho
f137cc10f4
Remote magiquest protocol ( #2963 )
...
Co-authored-by: Aaron Hertz <aaron@rockforest.org>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-02-18 22:22:41 +01:00
Adrián Panella
8cb9be7560
Analog threshold ( #3190 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-18 09:14:10 +13:00
Felix Storm
38259c96c9
CAN bus: support bit mask for on_frame can_id ( #3196 )
2022-02-17 17:00:31 +13:00
mckaymatthew
4aeacfd16e
Add max9611 High Side Current Shunt ADC ( #2705 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-08 22:56:40 +13:00
Franck Nijhof
e7864a28a1
Add device class support to Switch ( #3012 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-02-04 09:04:48 +13:00
Keilin Bickar
21803607e7
Add new Lock core component ( #2958 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-02-04 07:24:31 +13:00
Wouter van der Wal
a718ac7ee0
Add qr code support for displays ( #2952 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2022-01-26 22:20:45 +13:00
VitaliyKurokhtin
8187a4bce9
Command retain option for MQTT component ( #3078 )
2022-01-23 21:05:37 +13:00
Sympatron GmbH
5026bc7a78
Native ESP32 CAN support ( #1629 )
...
Co-authored-by: Guillermo Ruffino <glm.net@gmail.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-12 08:54:35 +13:00
Sergey Dudanov
9a70bfa471
New Midea IR component, improvements and fixes ( #2847 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-01-10 11:47:19 +13:00
Valentin Ochs
b406c6403c
Create new kalman_combinator component ( #2965 )
2022-01-09 23:44:36 +01:00
Jonas De Kegel
542fb2175b
Support inverted tm1637 display ( #2878 )
...
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-12-20 09:30:35 +01:00
Krzysztof Białek
515519bc87
Provide an option to select MQTT unique_id generator ( #2701 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Oxan van Leeuwen <oxan@oxanvanleeuwen.nl>
2021-11-15 15:49:18 +01:00
Krzysztof Białek
f643a46bbf
Allow setting custom command_topic for Select and Number components ( #2714 )
2021-11-14 14:59:34 +01:00
Sergey V. DUDANOV
aae63a7ff3
Add climate on_state trigger ( #2707 )
2021-11-13 15:42:15 +01:00
Maurice Makaay
e99af991ec
Uart debugging support ( #2478 )
...
Co-authored-by: Maurice Makaay <mmakaay1@xs4all.net>
Co-authored-by: Maurice Makaay <account-github@makaay.nl>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 11:34:17 +13:00
Laszlo Gazdag
0bdb48bcac
Make OTA function switchable in web_server component ( #2685 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2021-11-11 08:31:22 +13:00
Tim Niemueller
11f1e28139
Make per-loop display clearing optional ( #2626 )
...
Currently, in each loop during DisplayBuffer::update_() the display is
cleared by calling DisplayBuffer::clear().
This prevents more efficient display usages that do not render the
screen in each loop, but only if necessary. This can be helpful, for
example, if images are rendered. This would cause the loop time to be
exceeded frequently.
This change adds a new optional flag "auto_clear" that can be used to
control the clearing behavior. If unset, the DisplayBuffer defaults to
enabled auto clearing, the current behavior and thus backward compatible.
This flag applies to displays that use DisplayBuffer.
Example excerpt:
globals:
- id: state
type: bool
restore_value: no
initial_value: "false"
- id: state_processed
type: bool
restore_value: no
initial_value: "false"
switch:
- platform: template
name: "State"
id: state_switch
lambda: |-
return id(state);
turn_on_action:
- globals.set:
id: state
value: "true"
- globals.set:
id: state_processed
value: "false"
turn_off_action:
- globals.set:
id: state
value: "false"
- globals.set:
id: state_processed
value: "false"
display:
- platform: ili9341
# ...
auto_clear_enabled: false
lambda: |-
if (!id(state_processed)) {
it.fill(COLOR_WHITE);
if (id(state)) {
it.image(80, 20, id(image1));
} else {
it.image(80, 20, id(image2));
}
id(state_processed) = true;
}
Co-authored-by: Tim Niemueller <timdn@google.com>
2021-11-03 17:56:09 +01:00
Paul Monigatti
331a3ac387
Add option to use MQTT abbreviations ( #2641 )
2021-10-31 15:34:08 +13:00
Paul Monigatti
1308236429
Revert "Added test for bme680_bsec" ( #2518 )
...
This reverts commit 7f6a50d291
2021-10-14 12:31:52 +02:00
