Jesse Hills
6b0c125f6a
Merge branch 'current' into beta
2022-11-16 12:30:35 +13:00
Guillermo Ruffino
0978f22ddd
suggest using broadcast address for pzemac ( #2293 )
2022-11-15 10:36:35 -08:00
Mikkel Jeppesen
b136931741
Update bme680_bsec.rst
2022-11-14 23:00:10 +01:00
H. Árkosi Róbert
44a37e3a5a
Update homeassistant.rst
2022-11-14 14:17:55 +01:00
H. Árkosi Róbert
a6f955354c
Merge pull request #2394 from pauln/update-sm300d2-docs
...
Revise SM300D2 documentation
2022-11-14 11:18:58 +01:00
H. Árkosi Róbert
8201a0df2c
Merge pull request #2383 from CWempe/patch-1
...
Remove duplicated option in hmc5883l.rst
2022-11-14 11:14:57 +01:00
Mikkel Jeppesen
5536822b4b
Update description on temperature offset
...
This clarifies the "polarity" of the temperature offset setting
2022-11-13 19:50:17 +01:00
Gilles van den Hoven
983ca09fdc
Updates for new functionality of the EZO component. ( #2133 )
...
Co-authored-by: Steve HOLWEG <PoppyPop@users.noreply.github.com>
Co-authored-by: Samuel Sieb <samuel-github@sieb.net>
2022-11-10 11:08:25 +13:00
Jesse Hills
da4402105e
Merge branch 'current' into beta
2022-11-10 11:08:13 +13:00
Nick
5a1b07af19
Add information about 3.3v current ability and UART rx_buffer_size ( #2281 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-11-10 08:00:56 +13:00
Colin Leroy-Mira
b96679e6ca
Merge branch 'current' into current
2022-11-09 16:53:49 +01:00
H. Árkosi Róbert
f65720c831
Merge pull request #2406 from optimusprimespace/current
...
SDM230M important notice to user to pay attention when configuring the energy monitor
2022-11-09 16:53:36 +01:00
Colin Leroy-Mira
bc12457fb5
Explicit wiring a bit
2022-11-09 16:49:31 +01:00
Jesse Hills
ff64be2162
Merge branch 'current' into next
2022-11-09 17:26:51 +13:00
swifty99
68dafe02ca
Remove misleading specification in example yaml
...
Integration time of 2.4ms gives most inaccurate results. Auto integration time does a good job and is default. Reference yaml which most users copy should reflect this.
2022-11-07 16:44:59 +01:00
optimusprimespace
4202df26a7
Merge branch 'esphome:current' into current
2022-11-02 18:37:55 +01:00
Dennis
87ccff4297
Added note about decimal accuracy of other sensors
...
Any sensors other than the DHT11 has at least one digit of accuracy. The default is 0, so this accuracy is lost and it's not obvious that the default masks the possibly higher resolution.
2022-10-30 18:39:07 +01:00
whnr
c0579f928e
Update max31856.rst
...
Added note that only K type is supported at the moment.
2022-10-27 19:02:18 -04:00
Paul Nicholls
f99ee565a4
Revise SM300D2 documentation
...
Adds information about the LCD modules which are often sold with/for these sensors, and using them in conjunction with an ESP. Also notes that INPUT_PULLDOWN mode may help with reliability, and aligns some of the config descriptions with other air quality sensors.
2022-10-27 20:27:10 +13:00
Jesse Hills
1160dc279f
Remove devices on home page and replace with platforms ( #2393 )
2022-10-27 15:43:17 +13:00
Jesse Hills
1f2fad852c
Merge branch 'current' into next
2022-10-26 12:07:51 +13:00
H. Árkosi Róbert
5e214c836f
Remove human readable example from uptime ( #2384 )
2022-10-25 19:10:06 +13:00
Samuel Sieb
1dad7e4a57
fix pulse_counter example indent ( #2387 )
...
fixes #2386
2022-10-24 11:08:37 -07:00
Christoph Wempe
f5e4c2a39a
Remove duplicated option in hmc5883l.rst
...
The **range** option was listed twice.
2022-10-23 12:52:51 +02:00
Ben Marengo
859c1accae
clarify that active
is nested
2022-10-21 21:47:35 +01:00
rlowens
50eb076c70
Add example workaround for static uniqueid
...
Since the sensor's uniqueid is static you have to use the copy sensor instead. Here's an example of doing that.
2022-10-19 01:18:09 -05:00
Maximilian
bb0900058b
Add docs from adc128s102 sensor ( #2308 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-10-19 17:06:26 +13:00
Jesse Hills
0a11470ac9
Merge branch 'current' into beta
2022-10-19 10:30:16 +13:00
thatso
69b1bf4436
Update LYWSDCGQ description in xiaomi_ble.rst ( #2305 )
2022-10-19 08:07:43 +13:00
Daniel Correa Lobato
0354a78e1c
Update cse7766.rst ( #2327 )
2022-10-19 08:03:26 +13:00
Dominik Bruhn
3b5704deb7
Fixed UFire EC Documentation ( #2357 )
2022-10-19 08:01:57 +13:00
Jesse Hills
e3c261bdac
Merge branch 'current' into next
2022-10-13 09:49:31 +13:00
Jesse Hills
f8c31b2a86
Merge branch 'next' into bump-2022.10.0b1
2022-10-13 09:18:46 +13:00
RoboMagus
af9abec4f4
Update docs for ble_client RSSI sensor ( #2339 )
2022-10-12 15:24:00 +13:00
polgarc
e09caf5c8c
Fix broken links
2022-10-09 23:38:44 +02:00
Francisco J. Solis
e7d8e75dd8
docs: update the quantile link
...
The quantile link has been updated to a more descriptive one, which gives a better idea of the quantile function.
Refs: https://github.com/esphome/issues/issues/3622
2022-10-04 23:27:02 -05:00
Patrick ZAJDA
86829a7eeb
Add id and teleinfo_id to teleinfo configuration variables ( #2340 )
2022-10-05 14:31:51 +13:00
David Girón
728bb6ccf0
Update YAML indent of mpl3115a2
2022-09-28 21:36:30 +02:00
bakeromso
438199f7f5
fixed typo's and added coma
2022-09-26 14:40:47 +02:00
Alex Iribarren
28740383e5
Mention that update_interval can be never
2022-09-25 16:20:56 +02:00
imgbot[bot]
aa88cd000d
[ImgBot] Optimize images ( #2313 )
...
Co-authored-by: ImgBotApp <ImgBotHelp@gmail.com>
2022-09-21 10:24:40 +02:00
Pascal Vizeli
9fb1ebf171
ufire doc fixes ( #2297 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-21 19:44:26 +12:00
Jesse Hills
a1d6fe2d0d
Merge branch 'current' into beta
2022-09-20 17:14:41 +12:00
blakadder
928513cb97
align template sensor unit display
...
Just cosmetics to align the template sensor unit display with the impedance sensor unit which is Ω
2022-09-18 14:16:58 +02:00
Jesse Hills
0d8024c385
Merge branch 'current' into next
2022-09-14 17:00:04 +12:00
Pascal Vizeli
6985e68895
U-fire/ph ( #2285 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-14 16:51:28 +12:00
David Buezas
e2a524bd5a
Added documentation for bl0942 ( #2286 )
2022-09-12 09:36:13 +12:00
Keilin Bickar
c735cc2253
Add MPL3115A2 component ( #2009 )
...
* Add MPL3115A2
* Resized image
* Extended underline
2022-09-09 00:18:10 -05:00
Pascal Vizeli
8044302769
Add documentation for ufire_ec ( #2273 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-08 22:30:16 +12:00
H. Árkosi Róbert
f7bdf7b51b
Update xiaomi_ble.rst
2022-09-07 09:33:51 +02:00
H. Árkosi Róbert
c5d355b551
Update xiaomi_ble.rst
2022-09-06 15:46:06 +02:00
RoboMagus
194c8e429f
Esp32 pulsecounter optional pcnt ( #2212 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-09-02 13:41:09 +12:00
Fabian Berthold
b7e3a5d60c
Add documentation for binary sensor map sum type( #2123 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-31 16:52:35 +12:00
Wouter van der Wal
beb7a459ab
Feature/ibeacon rssi sensor ( #2248 )
2022-08-31 16:42:51 +12:00
Jesse Hills
f6abea22f1
Merge branch 'current' into next
2022-08-31 16:01:32 +12:00
Guillermo Ruffino
7bc94261cb
schema-202208 ( #2243 )
2022-08-31 13:55:05 +12:00
MrEditor97
2e34f4772b
Support for MCP9600 sensor ( #2217 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-25 15:49:35 +12:00
optimusprimespace
4d65509f8e
typo
2022-08-21 15:02:47 +02:00
optimusprimespace
14e5c78c71
updated example code to baud rate
2022-08-21 15:02:18 +02:00
optimusprimespace
412c8590b2
Updated the website link
2022-08-21 15:00:31 +02:00
optimusprimespace
9d2f261faa
Merge branch 'esphome:current' into current
2022-08-21 14:52:34 +02:00
Jesse Hills
5a5014e0e9
Merge branch 'current' into next
2022-08-19 11:35:16 +12:00
imgbot[bot]
a0eaf4ba48
[ImgBot] Optimize images ( #2231 )
...
Co-authored-by: ImgBotApp <ImgBotHelp@gmail.com>
2022-08-19 10:51:06 +12:00
Keith Burzinski
3d26641178
Add dps310 sensor doc ( #2218 )
2022-08-19 07:49:58 +12:00
functionpointer
76fe7c7f18
hydreon: Document temperature, lens_bad and em_sat ( #2188 )
2022-08-17 16:07:36 +12:00
Jesse Hills
133f1b4d33
Merge branch 'current' into beta
2022-08-17 12:58:25 +12:00
optimusprimespace
0b7a66694e
Update sdm_meter.rst
2022-08-16 18:31:31 +02:00
optimusprimespace
48cef6d02f
Update sdm_meter.rst
2022-08-16 18:30:52 +02:00
optimusprimespace
be1ffa5e6f
Update sdm_meter.rst
2022-08-16 18:28:53 +02:00
optimusprimespace
538db9b428
Update sdm_meter.rst
2022-08-16 18:16:59 +02:00
@RubenKelevra
3fb810b46e
tcs34725: Add overexposure quirk note ( #2127 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-16 16:08:16 +12:00
Jon Little
4c907ac593
Adding notes about mulit-phase applications. ( #2151 )
2022-08-16 16:08:09 +12:00
puuu
cbacebc478
Add documentation of pvvx_mithermometer display platform ( #1986 )
2022-08-15 10:56:29 +12:00
Samuel Sieb
e1bb6239df
document new apds9960 parameters ( #2222 )
...
Co-authored-by: Samuel Sieb <samuel@sieb.net>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-08-15 10:17:01 +12:00
Jesse Hills
ddcdab96f2
Merge branch 'current' into beta
2022-08-15 08:23:25 +12:00
Zoltan Kozma
ccebcb8968
dots
2022-08-10 18:51:56 +01:00
Zoltan Kozma
94483b0fe9
indent
2022-08-10 17:06:22 +01:00
Zoltan Kozma
f7897db660
Added how to use the built-in battery voltage divider network in the Firebeetle ESP32-E
2022-08-10 16:44:12 +01:00
Jesse Hills
d48af09642
Merge branch 'current' into next
2022-08-08 08:23:47 +12:00
Derek M
e0b50d1a82
Updating xiaomi_ble.rst to add signal_strength to pvvx_mithermometer ( #2211 )
...
Co-authored-by: doolbneerg <doolbneerg@outlook.com>
2022-08-08 07:30:33 +12:00
Carlos Garcia Saura
b8614d2626
Update index.rst
2022-08-06 16:28:15 +02:00
Viktor Nagy
743ada79e8
Fixed erroneous Nextion Sensor attributes ( #2113 )
...
* Fixed erroneous Nextion Sensor attributes
2022-08-02 23:04:08 -07:00
Samuel Sieb
45deeca413
docs for PR 3676 (add address option) ( #2207 )
2022-08-03 07:47:41 +12:00
piechade
c4c056d60b
Add SMT100 Soil Moisture Sensor documentation ( #2197 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
Co-authored-by: Dennis Piecha <d.piecha@ymail.com>
2022-07-28 11:22:56 +12:00
RoboMagus
a84484e0fd
Add set_total_pulses to pulse_counter docs ( #2187 )
2022-07-25 14:20:18 +12:00
cserem
8d50db9f4f
Update modbus_controller.rst
...
In the example `i` gets incremented before the loop is over, but it is referenced again.
This can cause unexpected resutls if just blindly copy this example. (ask me, how i know :)
2022-07-24 16:52:05 +02:00
H. Árkosi Róbert
24cb120c62
Update xiaomi_ble.rst ( #2174 )
2022-07-05 13:23:44 +02:00
H. Árkosi Róbert
771f6dfcda
Update xiaomi_ble.rst
...
As per corrections in https://github.com/esphome/esphome-docs/pull/2171#issuecomment-1174753882
2022-07-05 10:31:34 +02:00
H. Árkosi Róbert
e585f047cf
Update xiaomi_ble.rst
...
- added tips for improving reception performance
- some clarifications about TeLink flasher
- moved PVVX above ATC as PVVX is maintained, ATC seems to be abandoned, as per the message of the author in the repo, redirecting users to PVVX.
2022-07-05 10:06:52 +02:00
H. Árkosi Róbert
2b12dd408c
Merge pull request #2044 from sumirati/feature_1534
...
Update dht.rst with DHT21/AMS2301
2022-07-01 10:46:27 +02:00
H. Árkosi Róbert
2d6552d545
Merge pull request #2083 from sumirati/feature_1398
...
Feature 1398
2022-07-01 10:45:18 +02:00
Sybren A. Stüvel
262c698853
Clarify accuracy_decimals
in sensor config
...
The documentation for `accuracy_decimals` was a bit vague and inaccurate (oh the irony). I think this is better.
As discussed in the Discord channel with @ssieb.
2022-06-30 23:57:19 +02:00
Jesse Hills
2547441e40
Remove min_save_interval config option ( #2162 )
2022-06-30 16:48:01 +12:00
H. Árkosi Róbert
9bb84f55a5
Merge pull request #2140 from joegross/patch-1
...
fix yaml indentation
2022-06-28 17:46:53 +02:00
Lukas Klass
75f3e84361
fix naming of configuration variable
2022-06-27 20:13:13 +02:00
Maurice Makaay
a3673851fd
Merge pull request #2043 from sumirati/issue_3229
...
Fix typo in honeywellabp.rst
2022-06-25 19:21:15 +02:00
Joe Gross
bd9f41c3f6
fix yaml indentation
2022-06-16 22:56:36 -07:00
Jesse Hills
e1daa7225c
Merge branch 'current' into next
2022-06-08 22:46:09 +12:00
Guillermo Ruffino
3ab83fc736
format clean up 2022-05 ( #2091 )
2022-06-06 20:31:19 -03:00
Martin
02007a12f2
Sgp4x ( #2016 )
2022-05-19 12:47:37 +12:00
Jesse Hills
bc5d77164f
Merge branch 'current' into next
2022-05-16 13:33:17 +12:00
Jesse Hills
3b4b1ff419
Merge branch 'current' into beta
2022-05-16 13:07:05 +12:00
sumirati
4f11e2a1b8
Update AHT10 docs to show support for DHT20 sensor
2022-05-16 01:10:44 +02:00
sumirati
5a082d7c6f
Update AHT10 to include AHT20/21
2022-05-13 14:51:10 +02:00
Chris Johnson
a4498e36b2
Update Inkbird TH1 docs to show support for TH2 sensors ( #2073 )
2022-05-13 09:21:02 +12:00
swifty99
306f5f55e8
TCS34725 automatic integration times ( #1951 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-12 16:53:37 +12:00
Jesse Hills
528f0bfba9
Merge branch 'current' into next
2022-05-11 09:35:55 +12:00
Martin
42d83d8176
remove trailing quote ( #2061 )
2022-05-10 15:38:59 +02:00
Martin
465c291a38
fix typos in scd4x docs ( #2060 )
2022-05-10 15:31:35 +02:00
Matthew Garrett
6f80107eea
Document the update_interval support and requirements for PMSX003 ( #1803 )
...
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 21:35:49 +12:00
Martin
99af70c048
document new options for scd4x ( #2032 )
2022-05-10 21:25:49 +12:00
Martin
bccd86bcac
Sen5x docs ( #2017 )
2022-05-10 20:15:10 +12:00
Martin
16e9425941
Document Scd4x environment compensation options ( #1526 )
...
* add documentation for modbus controller
* remove words from blacklist
* esp32 modbus controller
* doc update
* add epever cookbook
* fix merge failure
* documenting code changes
* updating examples
* remove offset
* fix formatting errors
* lint
* fix errors in links
* documenting modbus number and output
* updates with code changes
* fix indentation
* Improve doc
* Apply suggestions from code review
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
* Review suggestions part 2
* Fix Optional labels
* Rename files
* Fix index
* Fix doc links
* update scd4x to document new compensation options
* change indented to 4 spaces
* document changes after CR
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-05-10 08:27:39 +02:00
Ingo Theiss
c3d2635f5a
ENS210 Humidity & Temperature sensor component ( #1745 )
2022-05-09 17:23:40 +12:00
sumirati
90c47f451e
Update dht.rst with DHT21/AMS2301
2022-04-26 01:32:02 +02:00
sumirati
75c9461ff8
Fix typo in honeywellabp.rst
2022-04-26 00:56:19 +02:00
Martin
e4b35c7070
sps30: document pr#3410 ( #2033 )
2022-04-26 09:50:41 +12:00
Jarek.P
8210401500
Update pzemac.rst ( #1958 )
2022-04-22 14:20:05 +12:00
Jens Bretschneider
634541a820
Fix hx711 docs.rst ( #2023 )
2022-04-22 14:08:27 +12:00
imgbot[bot]
d5faa434c9
[ImgBot] Optimize images ( #2035 )
...
Co-authored-by: ImgBotApp <ImgBotHelp@gmail.com>
2022-04-22 14:05:05 +12:00
Guillermo Ruffino
a14c881b43
clean up beta 202204 ( #2020 )
2022-04-22 14:04:23 +12:00
I. Tomita
e26488848e
Documentation for BL0939 (Sonoff Dual R3 v2) ( #1970 )
2022-04-21 10:11:28 +12:00
James Duke
50522d92af
Adding support for the Mopeka Plus Plus sensor ( #2026 )
2022-04-20 12:50:26 +12:00
Jesse Hills
644a52fa2d
Merge branch 'current' into next
2022-04-19 12:33:32 +12:00
Jesse Hills
1f56003819
Merge branch 'current' into beta
2022-04-19 12:33:32 +12:00
EdJoPaTo
f2ce728684
Improve exponential_moving_average alpha description ( #1959 )
2022-04-14 16:33:09 +12:00
Benno Pütz
19fe3ed714
typos ( #1962 )
2022-04-14 16:30:39 +12:00
RadekHvizdos
5b4793203f
Update mcp3008 to fix wrong component description ( #1981 )
...
* Update mcp3008.rst
This chip is an AD converter, not an I/O Expander
* Update mcp3008.rst
Fix underline
2022-04-14 16:16:24 +12:00
Jesse Hills
4eb8b2af91
Merge branch 'current' into next
2022-04-14 13:48:27 +12:00
Jesse Hills
095e8e217d
Merge branch 'current' into beta
2022-04-13 16:15:24 +12:00
sumirati
a7441684b9
Added note on WAK signal for CCS811 ( #1998 )
2022-04-13 16:04:13 +12:00
Vendo232
8f86f6b6ab
Update xiaomi_miscale.rst ( #1995 )
2022-04-13 15:57:57 +12:00
Jesse Hills
1b704656c8
Fix path
2022-04-13 15:56:46 +12:00
Jesse Hills
67d009c4bb
Fix images
2022-04-13 15:41:29 +12:00
Jesse Hills
5f39c7e539
Update changelog for 2022.4.0b1
2022-04-13 15:31:22 +12:00
Jesse Hills
db6b31e8d8
Add docs for xiaomi_rtcgq02lm ( #1896 )
2022-04-12 16:19:25 +12:00
functionpointer
cef832fcd8
Add integration hydreon_rgxx for rain sensors by Hydreon ( #1616 )
2022-04-11 14:50:59 +12:00
RadekHvizdos
bbcb7a10ec
Add MCP3208 to MCP3204 integration ( #2006 )
2022-04-11 08:44:06 +12:00
djwlindenaar
f342bc9ffb
Document new option for Growatt Protocol version ( #1976 )
...
Co-authored-by: Daniel Lindenaar <daniel-git@lindenaar.eu>
2022-04-11 08:06:14 +12:00
Jesse Hills
5355ca24a2
Merge branch 'current' into next
2022-04-03 19:31:47 +12:00
Guillermo Ruffino
53d1abd7a8
Docs cleanup for schema gen ( #1973 )
2022-04-03 19:30:25 +12:00
Jesse Hills
e09f8921a3
Merge branch 'current' into beta
2022-03-16 14:05:42 +13:00
Jesse Hills
d28bc5c70b
Merge branch 'current' into next
2022-03-16 14:05:18 +13:00
andrewpc
49cc75ba41
QMP6988 Documentation ( #1935 )
2022-03-15 08:09:29 +13:00
Johannes Rebling
889bb5676d
Update htu21d.rst ( #1931 )
...
* Update htu21d.rst
adding SHT21 as supported
* fixing underline length...
* adding HTU21D / Si7021 / SHT21 to index
2022-03-12 18:37:41 +00:00
QbaF
af891ff5e3
Additional clarification to update_interval and sample_duration relat… ( #1898 )
...
* Additional clarification to update_interval and sample_duration relations
* Update components/sensor/ct_clamp.rst
Co-authored-by: Otto Winter <otto@otto-winter.com>
Co-authored-by: Flaviu Tamas <me@flaviutamas.com>
Co-authored-by: Otto Winter <otto@otto-winter.com>
2022-03-11 03:39:06 +00:00
Jesse Hills
49716cd0d6
Update honeywellabp.rst ( #1952 )
2022-03-07 11:47:05 +13:00
Sean Brogan
a1d238cc99
Add mopeka pro check integration docs ( #1564 )
...
Co-authored-by: Jesse Hills <3060199+jesserockz@users.noreply.github.com>
2022-03-01 11:30:37 +13:00
RubyBailey
e62c773d07
Honeywellabp ( #1880 )
...
Co-authored-by: RubyBailey <ruby_bailey11@hotmail.com>
2022-02-22 11:25:31 +01:00
EdJoPaTo
ba616dc327
send_first_at for exponential_moving_average ( #1928 )
2022-02-21 13:13:12 +13:00